본 연구에서는 촉매로 Co-Mn-Br계를 사용하고, 상대적으로 온화한 반응조건에서 2,6-Dimethylnaphthalene(DMN)의 산화 반응 특성과 촉매가 반응에 미치는 영향을 고찰하였다. 이를 위해 $2{\ell}$의 회분식 반응기를 이용하여 촉매의 농도를 조절하며 실험하였다. 먼저 반응시간에 따른 반응중간생성물의 농도변화를 분석하여 반응경로를 확인하였고, 그 결과 2-formyl-6-naphthoic acid, 2-methyl-6-naphthoic acid, 그리고 2-hydroxymethyl-6-methylnaphthalene이 반응중간물임을 확인할 수 있었다. 또한, 2,6-naphthalene dicarboxylic acid(NDA)의 수율은 Co와 Br의 농도에 많은 영향을 받는다는 것을 알 수 있었고, 제품의 품질 척도 중 하나인 color-b는 Mn의 농도와 밀접한 관련이 있는 것으로 나타났으며, 용매연소는 Mn과 Br의 농도조절로 줄일 수가 있었다. 조촉매로 Ce/Cu 화합물을 첨가함으로 NDA의 수율을 증가시키고 용매연소를 줄이는 결과를 얻을 수 있었다.
본 연구에서는 촉매로 Co-Mn-Br계를 사용하고, 상대적으로 온화한 반응조건에서 2,6-Dimethylnaphthalene(DMN)의 산화 반응 특성과 촉매가 반응에 미치는 영향을 고찰하였다. 이를 위해 $2{\ell}$의 회분식 반응기를 이용하여 촉매의 농도를 조절하며 실험하였다. 먼저 반응시간에 따른 반응중간생성물의 농도변화를 분석하여 반응경로를 확인하였고, 그 결과 2-formyl-6-naphthoic acid, 2-methyl-6-naphthoic acid, 그리고 2-hydroxymethyl-6-methylnaphthalene이 반응중간물임을 확인할 수 있었다. 또한, 2,6-naphthalene dicarboxylic acid(NDA)의 수율은 Co와 Br의 농도에 많은 영향을 받는다는 것을 알 수 있었고, 제품의 품질 척도 중 하나인 color-b는 Mn의 농도와 밀접한 관련이 있는 것으로 나타났으며, 용매연소는 Mn과 Br의 농도조절로 줄일 수가 있었다. 조촉매로 Ce/Cu 화합물을 첨가함으로 NDA의 수율을 증가시키고 용매연소를 줄이는 결과를 얻을 수 있었다.
The catalytic performance of Co-Mn-Br system was performed in the 2,6-dimethylnaphthalene(DMN) oxidation at relatively mild reaction conditions such as $160^{\circ}C$ and $6kg/cm^2$. Experiments were conducted using a $2{\ell}$ batch reactor with varying the concentr...
The catalytic performance of Co-Mn-Br system was performed in the 2,6-dimethylnaphthalene(DMN) oxidation at relatively mild reaction conditions such as $160^{\circ}C$ and $6kg/cm^2$. Experiments were conducted using a $2{\ell}$ batch reactor with varying the concentrations of catalysts. The reaction route of DMN oxidation was considered by measuring the concentration of intermediate species. As the intermediate species, 2-formyl-6-naphthoic acid, 2-methyl-6-naphthoic acid and 2-hydroxymethyl-6-methylnaphthalene are found. It was found that the yield of 2,6-naphthalene dicarboxylic acid(NDA) is largely dependent on the Co and Br concentrations. In addition, it was observed that color-b was closely related with Mn concentration in this experimental range. The burning loss of solvent could be reduced by controlling the concentration of Mn and Br. Addition of small amount of Ce and Cu compounds led to increase the NDA yields and decrease the burning amount of solvent.
The catalytic performance of Co-Mn-Br system was performed in the 2,6-dimethylnaphthalene(DMN) oxidation at relatively mild reaction conditions such as $160^{\circ}C$ and $6kg/cm^2$. Experiments were conducted using a $2{\ell}$ batch reactor with varying the concentrations of catalysts. The reaction route of DMN oxidation was considered by measuring the concentration of intermediate species. As the intermediate species, 2-formyl-6-naphthoic acid, 2-methyl-6-naphthoic acid and 2-hydroxymethyl-6-methylnaphthalene are found. It was found that the yield of 2,6-naphthalene dicarboxylic acid(NDA) is largely dependent on the Co and Br concentrations. In addition, it was observed that color-b was closely related with Mn concentration in this experimental range. The burning loss of solvent could be reduced by controlling the concentration of Mn and Br. Addition of small amount of Ce and Cu compounds led to increase the NDA yields and decrease the burning amount of solvent.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.