최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.18 no.4 = no.121, 2001년, pp.104 - 111
이건영 (연세대학교 기계공학과 대학원) , 남원우 (연세대학교 기계공학과 대학원) , 이상조 (연세대학교 기계전자공학부)
The toolpath generation for 3D shaped parts with adaptive isocurve is more precise than existing methods, and the machining time can be reduced. Whether adaptive isocurves are inserted or not is determined by the surface shape, but the number of curves inserted and the total path length vary with in...
윤승용, '스튜엇트 플랫폼형 공작기계를 이용한 표면형상예측 및 가공 시뮬레이터 개발,' 연세대학교 석사학위논문, 1998
G.W.Vickers, K.W. Quan 'Ball-Mills Versus End-Mills for curved Surface Machining,' Transactions of ASME Vol. 111, pp. 22-26, 1989
최병규, 전차수, 유우식, 편영식, 'CAD/CAM 시스템과 CNC 절삭가공,' 희중당
Yean-Ren Hwang and Cha-shong Liang 'Cutting Errors Analysis for Spindle-Tilting Type 5-Axis NC Machines,' Int. J. Advanced Manufacturing Technology, Vol. 14, pp. 399-405, 1998
Gershon Elber & Elaine Cohen 'Toolpath generation for freeform surface models,' Computer-Aided Design, Vol. 26, pp. 490-496, june, 1994
H Grabowski and X Li 'Coefficient formula and matirx of nonuniform B-spline functions,' Computer-Aided Design, Vol. 24, pp. 637-64, december, 1992
B K Choi, W S Yoo and C S Lee 'Matrix representation for NURB curves and surfaces,' Computer-Aided Design, Vol. 22, pp. 235-240, may, 1990
E. Agson Gani, J.P. Kurth, P. Vanherck and B. Lauwers 'A Geometrical Model of the Cut in Five-Axis Milling Accounting for the Influence of Tool Orientation,' Int. J. Adv. Manuf. Technology, Vol. 13, pp. 677-684, 1997
Y.N. Hu, W.C. Tse, Y.H. Chen and Z.D. Zhou 'Tool-Path Planning for Rough Machining of a Cavity by Layer-Shape Analysis,' Int. J. Adv. Manufacturing Technology, Vol. 14, pp. 321-329, 1998
Catania, G.,A computer-aided prototype system for NC rough milling of free-form shaped mechanical part-pieces, Computers in Industry, Vol. 20(2), pp. 275-393, 1991
※ AI-Helper는 부적절한 답변을 할 수 있습니다.