최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.18 no.7 = no.124, 2001년, pp.112 - 119
두승 (전북대학교 대학원) , 홍주원 (전북대학교 대학원) , 서남섭 (전북대학교 기계공학부)
In modern manufacturing, many products that have geometrically complicated features, including three-dimensional sculptured surfaces, are being designed and produced to meet various sophisticated functional specifications. The cutting force is required not only for the design of machine and cutting ...
H.Y. Feng and C.H. Menq, 'The Prediction of Cutting Forces in the Ball-End Milling Process. Part1: Model Formulation and Model Building Procedure,' International Journal of Machine Tools and Manufacture, Vol. 34, No. 5, pp. 697-710, 1994
H. Y. Feng and C. H. Menq, 'The Prediction of Cutting Forces in the Ball-End Milling Process. Part2 : Cut Geometry Analysis and Model Verification,' International Journal of Machine Tools and Manufacture, Vol. 34, No. 5, pp. 711-720, 1994
J. W. Sutherland, 'An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems,' ASME Journal of Engineering for Industry, Vol. 108, pp. 212-269, 1986
H. Y. Feng and C. H. Menq, 'A Flexible Ball-End Milling System Model for Cutting Force and Machining Error Prediction,' Journal of Manufacturing Science and Engineering, Vol. 18, pp. 461-469, 1996
H. Y. Feng and C. H. Menq, 'A Flexible Ball-End Milling System Model for Cutting Force and Machining Error Prediction,' Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 118, No. 4, pp. 461-469, 1996
C. C. Tal, K. H. Fhu, 'Model for Cutting Forces Prediction in Ball-End Milling,' International Journal of Machine Tools and Manufacture, Vol. 35, No. 1, pp. 45-54, 1991
W. A. Kline and R. E. Devor, 'The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts,' International Journal of Machine Tool Design Research, Vol. 22, No. 1, pp. 7-22, 1982
서남섭, '절삭가공학,' 동명사, pp. 103, 1999
※ AI-Helper는 부적절한 답변을 할 수 있습니다.