최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.18 no.8 = no.125, 2001년, pp.24 - 31
고성림 (건국대학교 기계설계학과) , 이상규 (건국대학교 기계설계학과 대학원) , 배승민 (건국대학교 기계설계학과 대학원)
초록이 없습니다.
Yoshida Fujii, Hiroyasu Iwabe, 'Cross Sections and Flxural Rigidity of Helical End Mills,' JSPE, Vol, 49, No. 6, pp. 45-50, 1983
M. E. Martellotti, 'An Analysis of the Milling Process,' trans. of the ASME, vol. 63, pp. 667-700, 1941
A. Reuteler, Cutting Tool Technology in High-Speed Milling(HSM), FRAISA SA, 1997
Elanayar, S., Y. C. Shin, 'Modeling of Tool Forces for Worn Tools : Flank Wear Effects,' J. of ASME, vol. 118, pp. 359-366, 1996
Ranganath, S. et al., 'The Role of Flank Face Interference in Improving the Accuracy of Dynamic Force Predictions in Peripheral Milling,' J. of ASME, Vol. 121, pp. 593-599, 1999
Mei, Z., et al. 'Active Chatter Suppression by On-Line Variation of the Rake and Clearance Angles in Turning-Principles and Experimental Investigations,' Int. J. of Mach. Tools Manufat. Vol. 34, No. 7, pp. 981-990, 1994
※ AI-Helper는 부적절한 답변을 할 수 있습니다.