최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.18 no.9 = no.126, 2001년, pp.110 - 121
류경희 (부산대학교 대학원) , 이동주 (부산대학교 대학원) , 김동진 (부산대학교 정밀정형 및 금형가공 연구소) , 김병민 (부산대학교 정밀정형 및 금형가공 연구소) , 김광호 (부산대학교 무기재료공학과)
During hot pipe bending using induction heating, the wall of bending outside is thinned by tensile stress. In design requirement, the reduction of wall thickness is not allowed to exceed 12.5%. So in this study, two methods of bending, one is loading of reverse moment and the other is loading of tem...
T. behne, 'A new bending technique for large diameter pipe,' IAMI, Vol. 1, pp. 34, 1983
W. OKeefe, 'Inductive bending machine seeks to reduce number of welds in nuclear piping system,' Power, Vol. 1, pp. 74-75, 1977
H. Blume, W. E. Speth, K. Bredenbruch, et al., 'The production of pipe bends for power stations by the induction heating,' Energy Dev., Vol. 12, pp. 9-15, 1983
S. Kuriyarna, T. Aida, 'Theoretical analysis of bending of tube having ununiform distribution of temperature by high frequency induction heating,' Proc. 4th Adv. Technol. of Plasticity, pp. 464-469, 1993
W. T. Wang, Z, Hu, 'Theory of pipe bending to a small bend radius using induction heating,' J. Mater. Process. Technol., Vol. 21, pp. 275-284, 1990
H. Asao, K. Okada, M. Wananabe, H. matsumoto, et aI, 'Analysis in workability of pipe bending using high frequency induction heating,' Proc. 24th Int. Mach. Tool. Des. Res. Conf., pp. 97-104, 1983
K. Kobatake, Th. Ichise, et aI., ' Dieless bending of non-circular pipes,' J. JSTP, Vol 28, No.313, pp. 158-165, 1987
H. Asao, K. Okada et aI., 'Prevention of reduction of Wall Thickness in Tube Bending Using High Frequency Induction Heating,' J. JSTP, Vol. 33, No. 372, pp. 49-55, 1992
Z. Hu, J. Q. Li, 'Computer simulation of pipe-bending processes with small bending radius using local induction heating,' J. Mat. Process. Technol., Vol. 91, pp. 75-79, 1999
Y. Oki, Y. Yoshida, et aI., ' Analysis of temperature distribution in a billet by induction heating,' J. JSTP, Vol. 40, No.7, pp. 533-537, 1990
F. P. Incopera, D. P. Dewitt, Fundametals of heat and mass transfer, John Wiley & Sons, Inc., 1996
H. Asao, K. Okada et aI., 'Numerical analysis of bending force in tube bending using frequency induction heating-investigation of metal forming local heating,' J. JSTP, Vol. 28, No. 313, pp. 150-157, 1987
※ AI-Helper는 부적절한 답변을 할 수 있습니다.