최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.18 no.10 = no.127, 2001년, pp.101 - 108
김영국 (부경대학교 기계공학부 대학원) , 윤문철 (부경대학교 기계공학부) , 하만경 (부경대학교 기계공학부) , 심성보 (부경대학교 기계공학부)
In this study, the static and dynamic characteristics of endmilling process were modelled and the analytic realization of chatter mechanism was discussed. In this reward, We have discussed on the comparative assessment of recursive time series modeling algorithms that cal represent time machining pr...
B. K. Fussell, K. Srinivasan, 'An lnvestigation of the End Milling Process under Varying Machining Conditions,' Trans of ASME, Journal of Engineering for Industry, Vol. 111, pp. 149-157, 1989
S. C. Lin, R. J. Yang, 'Force-based Model for Tool Wear Monitoring in Face Milling,' Int. J. Mach. Tools and Manufacture, Vol. 35, No. 9, pp. 1201-1211, 1995
Yusuf Altintas, 'Manufacturing Automation,' Cambridge Univ., pp. 33-46, 2000
R. Y. S. Chiou and S. Y. Liang, 'Chatter Frequency in Turning Considering Tool Compliance and Wearland,' Trans of ASME, Journal of Engineering for Industry, Vol. 121, pp. 307-311, 1999
이상민, 이영수, 주종남, '평판의 정면밀링 가공에서 발생하는 채터,' 정밀공학회 추계학술 대회 논문집, 1999
권원태, '마모된 공구 절삭으로 인한 채터발생시의 절삭력 예측,' 정밀공학회지, Vol. 13, No. 3, pp. 141-149, 1996
이종길, '절삭공구의 채터진동과 음향방출과의 실험적 연구,' 정밀공학회지, Vol. 12, No. 1, pp. 112-122, 1995
김영국, 윤문철, 하만경, 심성보, '채터모델링과 진단법에 관한 연구,' 정밀공학회 춘계학술대회논문집, pp. 971-974, 2001
김영국, '엔드밀 가공시 On-line 절삭력 모델링과 이상진단 분석,' 부경대학교 석사학위논문, 2000. 2
※ AI-Helper는 부적절한 답변을 할 수 있습니다.