최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.18 no.10 = no.127, 2001년, pp.200 - 207
이징구 (경기공업대학 기계계열) , 고성림 (건국대학교 기계설계학과) , 고대철 (양산대학 메카트로닉스과)
Burrs farmed in drilling are classified into three types, no burr, burrs with cap, teared burr. To control burr size in drilling, the second type burrs with cap are to be formed because it is small and uniform. It is necessary to understand the mechanism of cap formation to derive the burr formation...
S. L. Ko, D. Dornfeld, 'A Study on Burr Formation Mechanism,' Trans. ASME, J. Eng. for Materials and Technology, Vol.113, pp. 75-87, 1991.1
S. L. Ko, D. Dornfeld. 'Analysis of fracture in at the exit stage of metal cutting,' J. Material Process. Technology, Vol. 58, pp. 189-200, 1996
L. K. Gillespie, P. K. Blotter, 'The Formation and Properties of Machining Burrs,' Trans. ASME, J. Eng., for Industry, pp. 64-74, 1976
T. Miyake, A.Yamamoto, K.Kitajima, Y.Yanaka and K.Takazawa, 'Syudy on mechanism of Burr Formation in Drilling-Deformation of Material during Burr Formation,' JSPE-57-03, Vol. 3, pp. 87-92, 1991
M.Hashimura, K.Ueda, D.A.Dornfeld, K.Manabe, 'Analysis of Three Dimensionnal Burr Formation in oblique Cutting,' CIRP, 44/1, pp. 27-30, 1995
A.J.Pekelharing, 'The exit angle failure in interrupted cutting,' CIRP, Vol. 27, No. 1, pp. 5-10, 1978
Iwata, K, Ueda, K, Ikuda, K., 'Syudy of mechanism of Burr Formation in cutting based on direct SEM observation,' JSPE, Vol. 48, No.4, pp. 510-515, 1982
※ AI-Helper는 부적절한 답변을 할 수 있습니다.