$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

유출홀이 설치된 배열 충돌제트의 유동 및 열전달 특성
Flow and Heat/Mass Transfer Characteristics of Arrays of Impingement Jets with Effusion Holes 원문보기

大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.25 no.11 = no.194, 2001년, pp.1606 - 1615  

이동호 (연세대학교 대학원) ,  윤필현 ((주)LG전선 기계연구소) ,  조형희

Abstract AI-Helper 아이콘AI-Helper

The present study has been conducted to investigate heat/mass transfer characteristics on a target plate fur arrays of circular impingement jets with and without effusion holes. A naphthalene sublimation method is employed to determine local heat/mass transfer coefficients on the target plate. The e...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 해석이 필수적이다. 따라서, 본 연구에서는 상용 虹로그램인 FLUENT를 이용하여 유출홀이 설치된 경우와 그렇지 않은 경우에 대하여 분사판과 충돌판 사이에서의 유동특성을 고찰하였다.
  • 본 연구에서는 유출홀을 설치한 경우와 그렇지않은 경우에 대하여 판 사이 간격(H) 변화에 따른 충돌면에서의 국소 열/물질전달특성을 비교 . 고찰하였다.
  • 본 인구에서는 분사판에 유출홀을 설치한 경우와 그렇지 않은 경우에 대하여 분사판과 충돌판 사이의 간격을 변화시켜가며 중돌면에서의 국소 열/물진전달 특성을 고찰하였다. 국소 열/물질전달 특싱을 고찰하기 위하여 물실전날실험의 하나인 나*-탈렌 승화법을 이용하였다.
본문요약 정보가 도움이 되었나요?

참고문헌 (14)

  1. Koopman, R. N. and Sparrow, E. M., 1975, 'Local and Average Transfer Coefficients due to an Impinging Row of Jets,' Int. J. Heat Mass Transfer, Vol. 8, pp. 1261 - 1272 

  2. Martin, H., 1977, 'Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces.' Advanced Heat and Mass Transfer, Vol. 13, pp. 1-60 

  3. Downs, S. J. and James. E. H., 1987. 'Jet Impingement Heat Transfer - A Literature Survey,' ASME Paper No. 87-HT-35 

  4. Jambunathan, K., Lai, E., Moss, M. A. and Button, B. L., 1992, 'A Review of Heat Transfer Data for Single Circular Jet Impingement,' Int. J. Heat and Fluid Flow, Vol. 13, pp. 106-115 

  5. Viskanta, R., 1993, 'Heat Transfer to Impinging Isothermal Gas and Flame Jets,' Exp. Thermal and Fluid Science, Vol. 6, pp. 111-134 

  6. 윤필현, 이동호, 조형희, 2000, '배열충돌제트에서 횡방향 유동 성분에 다른 열/물질 전달 특성 고찰', 대한기계학회논문집 B권, 제24권 제2호, pp. 195-203 

  7. Huber, A. M. and Viskanta, R., 1994, 'Effect of Jet-Jet Spacing on Convective Heat Trasnfer to Confined Impinging Arrays of Axisymmetric Air Jets,' Int. J. Heat Mass Transfer, Vol. 37, No. 18, pp. 2859-2869 

  8. Cho, H. H. and Goldstein, R. J., 1996, 'Effect of Hole Arrangements on Impingement/Effusion Cooling,' Proceeding of 3rd KSME-JSME Thermal Engineering Conference, pp. 71 - 76 

  9. Cho, H. H. and Rhee, D. H., 2000, 'Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingement/Effusion Cooling System,' J Turbomachinery, Vol. 123 (Accepted) 

  10. 이동호, 조형희, 2000, '연소실 냉각을 위한 충돌제트/유출 냉각 기법에 유출판에서의 열전달 특성,' 대한기계학회 논문집 B, 제24권, 제3호, pp. 435-442 

  11. Ambrose, D., Lawrenson, I. J. and Sparke, C. H. S., 1975, 'The Vapor Pressure of Naphthalene,' J. Chem. Thermodynamics, Vol. 7, pp. 1173-1176 

  12. Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Exp. Thermal and Fluid Science, Vol. 10, pp. 416-434 

  13. Eckert, E. R. G., 1976, Analogies to Heat Transfer Processes, in Measurements in Heat Transfer, ed. Eckert, E. R. G. and Goldstein, R. J., pp. 397-423, Hemisphere Pub., New York 

  14. Kline, S. J. and McClinetock, F., 1953, 'Describing Uncertainty in Single Sample Experiments,' Mech. Eng., Vol. 75, pp.3-8 

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로