참고문헌 (17)

1. Han, J. C., and Park, J. S., 1988, 'Developing Heat Transfer in Rectangular Channels with Rib Turbulators,' Int. J Heat Mass Transfer, Vol. 31, No.1, pp. 183-195 

   상세보기

2. 우성제, 김완식, 조형희, 1998, '사각 덕트내 요철의 각도 변화에 따른 열전달 특성,' 1998 대한기계학회논문집 B, 제22권, 제4호, pp. 530-541 

   원문보기 상세보기

3. 우성제, 권혁진, 조형희, 1999, '터빈 기익 내부관 열전달 증대를 위해 설치된 요철의 형상 효과,' 1999 대한기계학회논문집 B, 제23권, 제1호, pp. 149-157 

4. 이세영, 조형희, 2000, '요철의 배열 변화에 따른 사각덕트에서의 열/물질전달 및 압력강하 특성,' 2000 유체공학 학술대회 논문집, pp. 23-26 

5. Cho, H. H., Wu, S. J., and Kim, W. S., 1998, 'A Study on Heat Transfer Characteristics in a Rib-roughened Rectangular Duct,' Proceeding of 11th International Symposium on Transport Phenomena, Hsinchu, Taiwan, Paper-No. 61, pp. 364 - 369 

6. Cho, H. H., Wu, S. J., and Kwon, H. J., 2000, 'Local Heat/mass Transfer Measurements in a Rectangular Duct with Discrete Ribs,' ASME J of Turbomachinery, Vol. 122, pp. 579 -- 586 

   

7. Hermanson, K., Parneix, S., Wofersdorf Von, J., and Semmler, K., 2000, 'Prediction of Pressure Loss and Heat Transfer in Inrtemal Cooling Passages,' ICHMT, Turbine 2000 

8. Bonhoff, B., Pameix, S., Leusch, J., Johnson, B. V., Schabacker, J., and Boles, A., 1999, 'Experimental and Numerical Study of Developed Flow and Heat Transfer in Coolant Channels with 45 Degree Ribs,' Int. J. of Heat and Fluid Flow, Vol. 20, pp. 311-319 

   상세보기

9. Taslim, M. E., Li, T., and Kercher, D. M., 1996, 'Experimental Heat Transfer and Friction in Channels Roughened with Angled, V-Shaped, and Discrete Ribs on Two Opposite Walls,' ASME J. of Turbomachinary, Vol. 118, pp. 20-28 

10. Han, J. C. and Zhang, Y. M., 1992, 'High Performance Heat Transfer Ducts with Parallel Broken and V-Shaped Broken Ribs,' Int. J. Heat Mass Transfer, Vol. 35, No.2, pp. 513 -- 523 

    상세보기

11. Chyu, M. K., and Natarajan, V., 1989, 'Local Heat Transfer on a Fait Surface Roughened Ith Broken Ribs,' 1989 ASME Winter Annual Meeting San Fransisco, CA, ASME, HTD, pp. 25 - 31 

12. Lau, S. C., McMillin, R. D., and Han, J. C., 1991, 'Turbulent Heat Transfer and Friction in a Square Channel with Discrete Rib Turbulators,' ASME J. of Turbomachinary, Vol. 113, pp. 360-366 

13. Ambrose, D., Lawrenson, I. J., and Sparke, C. H. S., 1975, 'The Vapor Pressure of Naphthalene,' J. Chem. Thermodynam., 7, pp. 1173 - 1176 

14. Goldstein, R. J., and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 

    상세보기

15. Kline, S. J., and McClintock, F. A., 1953, 'Describing Uncertainty in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8 

16. Dittus, P. W., Boelter, L. M. K., 1930, Univ. Cali. Publ. Engng, Vol. 2, No. 13, pp. 443-461; 1985 reprinted in Int. Commun. Heat Transfer, Vol. 12, pp. 3--22 

17. 1985 reprinted in Int. Commun. Heat Transfer, Vol. 12, pp. 3--22 

    상세보기

저자의 다른 논문 :

이세영 (12) 최청 (3)