UV-curable polyurethane acrylate prepolymers were prepared from diisocyanates [isophorone diisocyanate (IPDI), 2,4-toluene diisocyanate (TDI), or 4,4'-dicyclohexylmethane diisocyanate (H$_{12}$MDI)], diols [ethylene glycol (EG), 1,4-butane diol (BD), or 1,6-hexane diol (HD)], polypropylen...
UV-curable polyurethane acrylate prepolymers were prepared from diisocyanates [isophorone diisocyanate (IPDI), 2,4-toluene diisocyanate (TDI), or 4,4'-dicyclohexylmethane diisocyanate (H$_{12}$MDI)], diols [ethylene glycol (EG), 1,4-butane diol (BD), or 1,6-hexane diol (HD)], polypropylene glycol as a polyol. UY-curable mixtures were formulated from the prepolymer (90 wt%), reactive diluent monomer trimethylol propane triacrylate (10 wt%). and photoinitiator 1-hydroxycy-clohexyl ketone (3 wt% based on prepolymer/diluent). The effects of different diisocyanates/low molecular weigh dial on the dynamic mechanical thermal properties and elastic recovery of UV-cured polyurethane acrylate films were examined. The tensile storage modulus increased a little in the order of EG > BD > HD at the same diisocyanate. Two loss modulus peaks for all samples are observed owing to the glads transition of softs segments ($T_gh$) and the glass transition temperature of hard segments ($T_gh$). For the same diisocyanate, $T_gh$, decreased, however, $T_gh$ increased, in the order of HD > BD > EG. The elastic recovery also increased in the order of HD > BD > EG at the same diisocyanate. In case of same diols, $T_gh$ increased in the order of $H_12$MDl > TDI > IPDI significantly. The ultimate elongation and elastic recovery increased in the order of TDI > IPDI > $H_12$MDl at the same diol.l.
UV-curable polyurethane acrylate prepolymers were prepared from diisocyanates [isophorone diisocyanate (IPDI), 2,4-toluene diisocyanate (TDI), or 4,4'-dicyclohexylmethane diisocyanate (H$_{12}$MDI)], diols [ethylene glycol (EG), 1,4-butane diol (BD), or 1,6-hexane diol (HD)], polypropylene glycol as a polyol. UY-curable mixtures were formulated from the prepolymer (90 wt%), reactive diluent monomer trimethylol propane triacrylate (10 wt%). and photoinitiator 1-hydroxycy-clohexyl ketone (3 wt% based on prepolymer/diluent). The effects of different diisocyanates/low molecular weigh dial on the dynamic mechanical thermal properties and elastic recovery of UV-cured polyurethane acrylate films were examined. The tensile storage modulus increased a little in the order of EG > BD > HD at the same diisocyanate. Two loss modulus peaks for all samples are observed owing to the glads transition of softs segments ($T_gh$) and the glass transition temperature of hard segments ($T_gh$). For the same diisocyanate, $T_gh$, decreased, however, $T_gh$ increased, in the order of HD > BD > EG. The elastic recovery also increased in the order of HD > BD > EG at the same diisocyanate. In case of same diols, $T_gh$ increased in the order of $H_12$MDl > TDI > IPDI significantly. The ultimate elongation and elastic recovery increased in the order of TDI > IPDI > $H_12$MDl at the same diol.l.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
In this study, we used three kinds of diols such as EG, BD, and HD, which have different chain length. Aliphatic IPDI and HMDI having different cyclic structure and aromatic TDI were used to prepare polyurethane acrylate oligomer.
Generally, soft segment phase is likely to be separated with hard segment phase in the case of polyurethane acrylate based on the high molecular weight polyol. The fixed composition of high molecular weight PPG (Mμ=3500) was used to prepare UV curable polyurethane acrylate prepolymer in this study. Two loss modulus peaks for all samples prepared here were observed indicating the occurrence of phase separation.
후속연구
The reason why the 4 changes in the orderof HD > BD > EG is not clear 자 the present moment. More detailed studies should be made. In case of same diol, the #increased in the order of H[2MDI > TDI > IPDI significantly.
참고문헌 (18)
J. Appl. Polym. Sci. T. A. Speckhard 30 647 1985 10.1002/app.1985.070300215 T. A. Speckhard, K. K. S. Hwang, S. B. Lin, S. Y. Tsay, M. Koshiba, Y. S. Ding, and S. L. Cooper,J. Appl. Polym. Sci.,30, 647 (1985).
J. Appl. Polym. Sci. H. D. Kim 67 2153 1998 10.1002/(SICI)1097-4628(19980328)67:13<2153::AID-APP5>3.0.CO;2-D H. D. Kim and T. W. Kim,J. Appl. Polym. Sci.,67, 2153 (1998).
J. Appl. Polym. Sci. B. K. Kim 60 799 1996 10.1002/(SICI)1097-4628(19960509)60:6<799::AID-APP2>3.0.CO;2-E B. K. Kim and K. H. Kim,J. Appl. Polym. Sci.,60, 799 (1996).
J. Appl. Polym. Sci. B. Nabeth 60 2113 1996 10.1002/(SICI)1097-4628(19960620)60:12<2113::AID-APP8>3.0.CO;2-P B. Nabeth, J. F. Gerard, and J. P. Pascault,J. Appl. Polym. Sci.,60, 2113 (1996).
Polymer Degradation and Stability C. Decker 64 293 1999 10.1016/S0141-3910(98)00205-5 C. Decker and K. Zahouily,Polymer Degradation and Stability,64, 293 (1999).
J. Appl. Polym. Sci. S. Velankar 62 1361 1996 10.1002/(SICI)1097-4628(19961128)62:9<1361::AID-APP6>3.0.CO;2-F S. Velankar, J. Pazos, and S. L. Cooper,J. Appl. Polym. Sci.,62, 1361 (1996).
Chem. Eng. Commun. S. B. Lin 30 251 1984 10.1080/00986448408911131 S. B. Lin, S. Y. Tsay, T. A. Speckhard, K. K. S. Hwang, J. J. Jezerc, and S. L. Cooper,Chem. Eng. Commun.,30, 251 (1984).
10.1201/9781482273984 M. Szycher, “Szycher’s Handbook of Polyurethanes”, Chap. 16, CRC Press, 2000.
10.1201/9781482273984 M. Szycher, “Szycher’s Handbook of Polyurethanes”, Chap. 11, CRC Press, 2000.
J. Polym. Sci., Part A, Poly. Chem. J. Chen 34 2889 1996 10.1002/(SICI)1099-0518(199610)34:14<2889::AID-POLA6>3.0.CO;2-M J. Chen, J. P. Pascault, and M. Taha,J. Polym. Sci., Part A, Poly. Chem.,34, 2889 (1996).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.