최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.19 no.2 = no.131, 2002년, pp.106 - 113
이제훈 (한국기계연구원 레이저기술연구그룹) , 서정 (한국기계연구원 레이저기술연구그룹) , 김정오 (한국기계연구원 레이저기술연구그룹) , 신동식 (경북대학교 대학원 기계공학과) , 이영문 (경북대학교 기계공학부)
Stencil is used normally as a mask for seeder pasting on pad of PCB. The objective of this study is to develop stencil cutting system and determine optimal conditions which make good-quality stencil by using a Nd:YAG laser. The effects of process parameters such as laser power, type of mask, gas pre...
최영규, '인쇄회로 설계와 배선 기술,' 홍릉과학 출판사, pp. 200, 200
이제훈, 'PCB 제작에의 레이저 응용기술,' Workshop 발표자료, 한국기계연구원, 2001
L.Prandtl, 'The Essentials of Fluid Dynamics,' Blackie & Son, 1952
B.A.Ward, 'Supersonic characteristics of nozzles used with lasers for cutting,' 'ICALEO'84, 1984
김도훈, '레이저 가공학,' pp. 280-281, 286, 166, 163, 경문사, 1990
김동원, '기계공작법,' 동명사, pp. 691, 1998
John Powell, ' $CO_2$ Laser cutting,' Spinger-Verlag, pp. 95, 1993
※ AI-Helper는 부적절한 답변을 할 수 있습니다.