최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.19 no.4 = no.133, 2002년, pp.124 - 131
In this paper, an extended volumetric error model considering backlash in a three-axis machine tool was proposed and utilized for calculating the volumetric error of the machine tool at any position in three-dimensional workspace. Backlashes are interrelated; i.e. the angular backlash affects the st...
Kreng, V. B., Liu, C. R., and Chu, C. N., 'A Kinematic Model for Machine Tool Accuracy Characterisation,' The International Journal of Advanced Manufacturing Technology, Vol. 9, pp. 79-86, 1994
Ferreira, P. M., Liu, C. R., 'An Analytical Quadratic Model for the Geometric Error of a Machine Tool,' Journal of Manufacturing Systems, Vol. 5, No. 1, pp. 51-63, 1986
Ehmann, K. F., Wu, B. T., 'A Generalized Geometric Error Model for Multi-Axis Machines,' Annals of the CIRP, Vol. 36, No. 1, pp. 253-256, 1987
Mou, J., Liu, C. R., 'A Method for Enhancing the Accuracy of CNC Machine Tool for On-Machine Inspection,' Journal of Manufacturing Systems, Vol. 11, No. 4, pp. 229-237, 1992
Dorndorf, U., Kiridena, V. S. B., and Ferreira, P. M., 'Optimal budgeting of Quasistatic Machine Tool Errors,' Transactions of the ASME, Journal of Engineering for Industry, Vol. 116, pp. 42-53, February, 1994
Chen, X. B., Geddam, A., and Yuan, Z. J., 'Accuracy Improvement of Three-axis CNC Machining Centers by Quasi-Static Error Compensation,' Journal of Manufacturing Systems, Vol. 16, No. 5, pp. 323-336, 1997
Okafor, A. C., Ertekin, Y. M., 'Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics,' International Journal of Machine tools and Manufacture, Vol. 40, No. 8, pp. 1199-1213, 2000
Kakino, Y., Ihara, Y., and Nakatsu, Y., 'The Measurement of Motion Error NC Machine Tools and Diagnosis of Their Origins by Using Telescoping Magnetic Ball Bar Method,' Annals of the CIRP, Vol. 36, No. 1, pp. 377-380, 1987
Knapp, W., 'Accuracy of Length Measurement and Positioning: Statistical Measurement and Contouring Mode,' Annals of the CIRP, Vol. 37, No. 1, pp. 511-514, 1988
Kao, J. Y., Yeh, Z. M., Tarng, Y. S., and Lin, Y. S., 'A Study of Backlash on the Motion Accuracy of CNC Lathes,' International Journal of Machine Tools and Manufacture, Vol. 36, No. 5, pp. 539-550, 1996
Pahk, H. J., Kim, Y. S., and Moon, J. H., 'A New Technique for Volumetric Error Assessment of CNC Machine Tools Incorporating Ball Bar Measurement and 3D Volumetric Error Model,' International Journal of Machine Tools and Manufacture, Vol. 37, No. 11, pp. 1583-1596, 1997
Ahn, K. G., Cho, D. W., 'Proposition for a Volumetric Error Model Considering Backlash in Machine Tools,' The International Journal of Advanced manufacturing Technology, Vol. 15, pp. 554-561, 1999
Hale, L. C., and Slocum, A. H., 'Design of antibacklash transmissions for precision position control systems,' Precision Engineering, Vol. 16, No. 4, pp. 244-258, 1994
Weck, M., 'Handbook of Machine Tools, Volume 3: Automation and Controls,' translated into English by Bibring, H., John Wiley & Sons, 1984
※ AI-Helper는 부적절한 답변을 할 수 있습니다.