최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.19 no.7 = no.136, 2002년, pp.133 - 140
주종남 (서울대학교 기계항공공학부) , 한동철 (서울대학교 기계항공공학부) , 박희재 (서울대학교 기계항공공학부) , 박상신 (영남대학교 기계공학부) , 제성욱 (서울대학교 기계항공공학부)
Ultrasonic Machining (USM) is widely used in cutting of non-conductive, brittle workpiece materials such as engineering ceramics. However, USM has a limitation in its application to micro machining because problems are occurred in attaching micro tools to the machine and maintaining high precision. ...
V.Soundrarajan, V.Radhakrishnan, 'An Experimental Investigation on The Basic Mechanisms Involved in USM,' Int. J. Mach. Tool Des. Res., Vol. 26, No. 3, pp. 307-321, 1986
M.Komarariah, P. Narasimha Reddy, 'Relative Performance of Tool Material in Ultrasonic Machining,' Wear, pp. 1-10, 1993
M.Komaraiah, 'A Study on The Influence of Workpiece Properties in Ultrasonic Machining,' Int. J. Mach. Tools Manufact., Vol. 33, No. 3, pp. 495-505, 1993
G..S.Kainth, Amitav Nandy, Kuldeep Singh, 'On The Mechanics of Material Removal in USM,' Int. J. Mach. Tools Des. Res. Vol. 19, pp. 33-41, 1979
Xi-Qing Sun, T. Masuzawa, 'Micro Ultrasonic machining and Self-Aligned Multilayer Machining/Assembly Technologies for 3D Micromachines,' University of Tokyo, 7-22-1 Roppongi, Minato-ku, Tokyo 106, Japan
Kai Egashira, T.Masuzawa, 'Application of Ultrasonic machining to Micromachining,' Seisan-Kenkyu, Vol. 49, No. 9
M.Komaraia, M.A.Manan, 'Investigation of surface roughness and accuracy in Ultrasonic Machining,' Precision Engineering, Vol. 10, No. 2, pp. 59-65, 1988
주종남, 김규만, 박상신, 김성윤, '미세방전가공 기술개발에 관한 연구,' 산업기술 기반과제 최종보고서, 1998
※ AI-Helper는 부적절한 답변을 할 수 있습니다.