최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.19 no.8 = no.137, 2002년, pp.63 - 70
이영문 (경북대학교 기계공학부) , 양승한 (경북대학교 기계공학부) , 송태성 (경북대학교 대학원 기계공학과) , 권오진 (경북대학교 대학원 기계공학과) , 백승기 (경북대학교 대학원 기계공학과 #AU=Young-Moon Lee)
In end milling process, the undeformed chip section area and cutting forces vary periodically with phase change of the tool. However the real undeformed chip section area deviates from the geometrically ideal one owing to cutter runout and tool shape error. In this study, a method of estimating the ...
Martellotti, M. E., 'An Analysis of the Milling Process,' Trans. of the ASME, Vol. 63, pp. 677-700, 1941
'Accuracy of Milled Surfaces.:Effect of Cutter Diameter, Number of Teeth, Runout and Feed,' Metal Cuttings, Vol. 9, No. 1, Jan. 1961
Tlusty, J. and Macneil, P., 'Dynamics of Cutting Forces in End Milling,' Annals of CIRP, Vol. 24, No. 1, pp. 21-25, 1975
Kline, W. A. and Devor, R. E., 'The Effect of Runout on Cutting Geometry and Forces in End Milling,' int. J. Mach. Tool Des. Res., Vol. 23 No. 2/3, pp. 123-140, 1983
Shaw, M. C., and Finnie, I., 'The Shear Stress in Metal Cutting,' Trans. of the ASME, Vol. 77, pp. 115-125, 1955
※ AI-Helper는 부적절한 답변을 할 수 있습니다.