참고문헌 (18)

1. Kim, J.S., Kim, Y.J., Park, Y.J. and Kim, Y.J., 2002. 'Engineering J-Integral Estimation for Internal Axial Surface Cracks in Cylinder (I)-Deformation Plasticity Based Estimation-,' Transactions of the KSME, A, Vol. 26, No.8, pp. 1672-1679 

   원문보기 상세보기

2. Kumar, V. and German, M.D., 1988, Elastic-Plastic Fracture Analysis of Through- Wall and Surface Flaws in Cylinders, EPRI Report, NP-5596 

3. Zahoor, A., 1991, Ductile Fracture Handbook, Vol. 2 Chapter 6 Axial Through-Wall Crack, Novetech Corp. 

4. Rahman, S., Brust, F., Ghadiali, N., Choi, Y.H., Krishnaswamy, P., Moberg, F., Brickstad, B. and Wilkowski, G., 1995, 'Refinement and Evaluation of Crack Opening Area Analyses for Circumferential Through-Wall Cracks in Pipes,' NUREG report NUREG/CR-6300, Battelle, OH 

5. Kim, Y.J., Huh, N.S. and Kim, Y.J., 2001, 'Enhanced Reference Stress Based J and COD Estimation Method for LBB Analysis and Comparison with GE/EPRI Method,' Fatigue and Fracture of Engineering Materials and Structures, Vol. 24, pp. 243-254 

   상세보기

6. Ainsworth, R.A, 1984, 'The Assessment of Defects in Structures of Strain Hardening Materials,' Engineering Fracture Mechanics, Vol. 19, pp. 633-642 

   상세보기

7. Kim, Y.J., Huh, N.S. and Kim, Y.J., 2002, 'Pressure Induced Hoop Stress Effect on Fracture Analysis of Circumferential Through-Wall Cracked Pipes,' Engineering Fracture Mechanics (to appear) 

8. R6, 2000, R6: Assessment of the Integrity of Structures Containing Defects, Revision 3, British Energy Generation Ltd. 

9. Kim, J.S, Kim, Y.J. and Kim Y.J., 2002, 'Fracture Behavior Estimation for Circumferential Surface Cracked Pipes (I) -J-Integral Estimation Solution -,' Transactions of the KSME, A, Vol. 26, No. 1, pp. 131-138 

   원문보기 상세보기

10. Kim, Y.J., Seok, C.S., Jun, H.K., Choi, Y.H. and Lee, J.B., 1996, 'Development of Nuclear Piping Integrity Expert System (I) -Evaluation Method Recommendation and Material Properties Inference-,' Transactions of the KSME, A, Vol. 20, No.8, pp. 575-584 

    원문보기 상세보기

11. ABAQUS, 1999, ABAQUS Standard/User's Manual, Hibbitt, Karlsson & Sorensen, Inc, R1 

12. Kim, Y.J., Shim, D.J., Huh, N.S. and Kim, Y.J., 2001, 'Plastic Limit Pressure for Cracked Cylinders Using Finite Element Limit Analyses,' International Journal of Pressure Vessels and Piping (to appear) 

13. Kiefner, J.F., Maxey, W.A., Eiber, R.J. and Duffy, A.R., 1973, 'Failure Stress Levels of Flaws in Pressurised Cylinders,' in Progress in Flaw Growth and Fracture Toughness Testing, ASTM STP 536, pp. 461-81 

14. Miller, A.G., 'Review of Limit Loads of Structures Containing Defects,' International Journal of Pressure Vessels and Piping, Vol. 32, pp. 191-327 

    상세보기

15. Kim, Y.J., Huh, N.S., Part, Y.J. and Kim, Y.J., 2001, 'Elastic-Plastic J and COD Estimations for Axial Through-Wall Cracked Pipes,' International Journal of Pressure Vessels and Piping (to appear) 

    상세보기

16. Webster, G.A. and Ainsworth, R.A., 1994, High Temperature Component Life Assessment, Chapman & Hall 

17. R5, 1998, R5: Assessment Procedure for the High Temperature Response of Structures, Issue 2, British Energy Generation Ltd 

18. Kim, J.S, Kim, Y.J. and Kim Y.J., 2002, 'Estimation of C'-Integral for Defective Components with General Creep Deformation Behaviors,' Transactions of the KSME, A, Vol. 26, No.5, pp. 795-802 

    원문보기 상세보기

저자의 다른 논문 :

김윤재 (139) 김영진 (161)