최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.26 no.6 = no.201, 2002년, pp.1026 - 1034
김연수 (건국대학교 기계항공공학부) , 최부희 (한국철도기술연구원, 시스템기술개발팀) , 박재민 (서울정수기능대학) , 최상훈 (건국대학교 대학원)
This paper describes the development of machining simulation program which is able to design cutter profile and 3-dimensional geometry for rotors in screw compressor. Based on the symmetric rotor profiles developed previously, cutters are designed and 3-dimensional geometries of rotors are generated...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Margolis, D. L., 1978, 'Analytical Modeling of Helical Screw Turbines for Performance Prediction,' Journal of Engineering for Power, Vol. 100, pp. 482-487
Fujiwara, M., Kasuya, K. and Matsunaga, T., 1984, 'Computer Modeling for Performance Analysis,' Proc. of the 1984 International Compressor Engineering Conference at Purdue, pp. 536-543
Fujiwara, M., Kasuya, K., Matsunaga, T. and Wadanabe, M., 1984, 'スクリュ壓縮機の性能解析',日本機械學會論文集(B編), Vol. 50, No. 452, pp. 1027-1033
Syoji Yoshimura, 1989, 'スクリュ壓縮機用 齒形の性能と性能豫測 フロクラム,' 新戶製鋼技報, Vol. 39, No.4, pp. 105-108
Shyh-Haur Su, Ching-Huan Tseng, 2000, 'Synthesis and Optimization for Rotor Profiles in Twin Rotor Screw Compressors,' Journal of Mechanical Design, Vol. 122, pp. 543-552
최상훈, 1995, '대칭형 스크류 로터 치형의 설계와 특성값에 대한 연구,' 건국대학교 학술지, 제39호, pp. 119-127
Adams, G. P. and Soedel, 'Computation of Compression Loads in Twin Screw Compressors,' Journal of Mechanical Design, Vol. 117, pp. 512-519
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.