고령토질 벽돌에 대한 fly ash의 첨가가 소결온도에 미치는 영향과 그에 따른 물성의 변화를 관찰하였다. Fly ash로는 탄소 8∼9%의 무연탄 연로 재를 사용하였고 고령토 등의 국산 천연원료를 이용하여 실험을 하였다. Fly ash와 고령토 등의 4종의 원료를 5가지의 혼합비로 조합하여 혼합, 성형하고 각각 1050${\circ}C$, 1100${\circ}C$, 1150${\circ}C$, 1200${\circ}C$의 온도로 소성하였다. 소성온도가 증가함에 따라 모든 시편에서 흡수율은 낮아지고 압축 강도는 증가하였다. 소성온도가 1100${\circ}C$ 이하인 경우 fly ash의 함량이 증가함에 따라 흡수율은 증가하고 강도가 감소하였다. 이에 비하여 소성온도가 1150${\circ}C$ 이상인 경우 흡수율은 소성온도가 낮은 경우와 유사한 경향을 보였으나 강도는 증가하였다.
고령토질 벽돌에 대한 fly ash의 첨가가 소결온도에 미치는 영향과 그에 따른 물성의 변화를 관찰하였다. Fly ash로는 탄소 8∼9%의 무연탄 연로 재를 사용하였고 고령토 등의 국산 천연원료를 이용하여 실험을 하였다. Fly ash와 고령토 등의 4종의 원료를 5가지의 혼합비로 조합하여 혼합, 성형하고 각각 1050${\circ}C$, 1100${\circ}C$, 1150${\circ}C$, 1200${\circ}C$의 온도로 소성하였다. 소성온도가 증가함에 따라 모든 시편에서 흡수율은 낮아지고 압축 강도는 증가하였다. 소성온도가 1100${\circ}C$ 이하인 경우 fly ash의 함량이 증가함에 따라 흡수율은 증가하고 강도가 감소하였다. 이에 비하여 소성온도가 1150${\circ}C$ 이상인 경우 흡수율은 소성온도가 낮은 경우와 유사한 경향을 보였으나 강도는 증가하였다.
The effect of fly ash addition to the kaolin block has been investigated. The addition affected the firing temperature and physical properties such as water absorption and compressive strength. The starting materials were from korea natural resources and the fly ash were from the power plant using c...
The effect of fly ash addition to the kaolin block has been investigated. The addition affected the firing temperature and physical properties such as water absorption and compressive strength. The starting materials were from korea natural resources and the fly ash were from the power plant using coal as fuel, containing free carbon of 8∼9 wt%. The starting natural materials were mixed with 5 different proportions of fly ash, pressed and then sintered at 1050, 1100, 1150 and 1200${\circ}C$. With sintering temperature, water absorption decreased and compressive strength increased. When specimens were sintered at the temperature lower than 1100${\circ}C$, water absorption increased and strength decreased with fly ash content. In contrast, when sintering was done at the temperature higher than 1150${\circ}C$, water absorption increased with fly ash content similarly but strength was improved.
The effect of fly ash addition to the kaolin block has been investigated. The addition affected the firing temperature and physical properties such as water absorption and compressive strength. The starting materials were from korea natural resources and the fly ash were from the power plant using coal as fuel, containing free carbon of 8∼9 wt%. The starting natural materials were mixed with 5 different proportions of fly ash, pressed and then sintered at 1050, 1100, 1150 and 1200${\circ}C$. With sintering temperature, water absorption decreased and compressive strength increased. When specimens were sintered at the temperature lower than 1100${\circ}C$, water absorption increased and strength decreased with fly ash content. In contrast, when sintering was done at the temperature higher than 1150${\circ}C$, water absorption increased with fly ash content similarly but strength was improved.
M. S. Lee, C. K. Na and M. Y. Kim, 'Resuability of Coal Fly Ash as an Additive for Clay Brick,' J. Kor. Sotid Waste Eng. Soc., 15 [4] 342-51 (1998)
K. N. Kim, J. H. Kwon and D. Y. Shin, 'The Manufacturing of Fly Ash-clay System Ceramics Bricks,' J. Kor. Sotid Wastes Eng. Soc., 18 [5] 459-67 (2001)
C. L. Verma, S. K. Handa, S. K. Jain and R. K. Yadav, 'Techno conimercial Perspectrve Study for Snitered F1y Ash Lightweight Aggregates in India,' Construction and Building Mat., 12 341-46 (1998)
IS : 3952, Specification for Burnt Clay Hollow Bricks for Walls and Partitions. Bureau of Indian Standards, New Delhi (1988)
M. Dondi, G. Ercotani, G. Guanni and M. Raimondo, 'Orimulsion Fly Ash in Clay Bricks Composition and Thermal Behaviour of Ash,' J. Euro. Ceram. Soc., 22 1729-35 (2002)
S. Kumar, 'A Perspective Study on Fly Ash lime gypsum Bricks and Hollow Blocks for Low Cost Housing Development,' J. Construction and Buitding Mat., 16 519-25(2002)
N. Inoue, S. Tsunematsu and W. Hara, 'Hydro-thermal Reastion and Hardening Properties of Fly Ash,' CAJ Review of the 37th General Meeting, 44-6 (1983)
K. Ukita, M. Ishii, K. Yamamoto, K. Azuma and K. Kohno, 'Properties of High Strength Concrete Using Classified Fly Ash,' Proceedings Fourth International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, 37-52, Istanbul, Turkey (1992)
J. T. Song, S. D. Yun, D. W. Rhou and K. S. Han, 'Manufacture and Properties of Coal Fly Ash clay Body,' J. Kor. Ceram. Soc., 33 [7] 771-78 (1996)
D. Y. Shin, S. M. Han and S. G. Choi, 'Synthesis of Ceramic Support for Immobilization of Microorganisms Using Fly Ash,' J. Kor. Ceram. Soc., 39 [9] 857-62 (2002)
AI-Helper
※ AI-Helper는 부적절한 답변을 할 수 있습니다.