$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

의치용 레진치와 수복용 복합레진 간의 결합강도에 관한 연구

SHEAR BOND STRENGTHS BETWEEN ABRASION-RESISTANT DENTURE TEETH AND COMPOSITE RESINS

Abstract

This study investigated the shear bond strengths between abrasion-resistant denture teeth and composite resins according to surface treatments. Denture teeth for this study were Trubyte IPN teeth(Dentsply Inc., USA) with interpenetrating polymer network and Endura Posterio (Shofu Inc. Japan) of composite resin teeth, and restorative composite resins were Clearfil FII (Kuraray, Japan) of the self-cured composite resin and Z100(3M Dental Product, USA) of the light-cured composite resin. Five different surface treatments were evaluated: (1) $50{\mu}m\;A1_2O_3$ sandblasting: (2) #100 carbide paper; (3) chloroform; (4) retentive holes; and (5) no treatment. After surface treatments, denture teeth were examined by scanning electron microscopy(SEM), and the maximum shear bond strengths between abrasion-resistant denture teeth and composite resins were measured using Instron. The results were as follows; 1. IPN teeth treated with sandblasting had the highest shear bond strength, and Endura treated with sandblasting and carbide paper had significantly greater shear bond strength than with any other surface treatment. 2. Regardless or composite resins, the shear bond strength on Endura was greater than on IPN teeth. 3. Regardless of denture teeth, the shear bond strength of Clearfil FII was greater han of Z100. 4. In appearance of SEM, IPN teeth treated with sandblasting showed generalized roughness on the all of surface, however, carbide paper treatment resulted in partly rough. Endura treated with sandblasting and carbide paper showed similar surface characteristics. Wetting denture teeth surface with chloroform removed the debris and created a particle-free and smooth surface.

참고문헌 (41)

  1. Halperin AR, Graser GN, RDgoff GS, Plekavich EJ. Mastering the art of complete dentures. Chicago : Quintessence Publishig Co., Inc. 1988 
  2. Abe Y, Sato Y, Akagawa Y, Ohkawa S. An in vitro study of high- strength resin posterior denture tooth wear. Int J Prosthodont 1997; 10:28-34 
  3. Whitman DJ et al. In vitro wear rates of three types of commercial denture tooth materials. J Prosthet Dent 1987;57:243-246 
  4. Hirano S, May KB, Wagner WC, Hacker CH. In vitro wear of resin denture teeth. J Prosthet Dent 1998:79:152-155 
  5. Jooste C, Geerts G, Adams L. Comparison of the clinical abrasion resistance of six commercially available denture teeth. J Prosthet Dent 1997:77: 23-27 
  6. Fraurlhofer JA Razavi R. Khan Z. Wear characteristics of high-strength denture teeth. J Prosthet Dent 1988:59:173-175 
  7. Kawara M, Carter JM, Ogle RE. Johnson RR. Bonding of plastic teeth to denture base resins. J Prosthet Dent 1991:66:566-571 
  8. Joo-Hee Lee, Chang-Whe Kim, Yung-Su Kim. An experimental study of the bond strength of denture teeth bonded to denture base materials. J Korean Acad Prosthodont 1996:34:464-473 
  9. Clancy JMS, Boyer DB. Comparative bond strengths of light-cured. heat-cured. and autopolymerizing denture resins to denture teeth. J Prosthet Dent 1989: 61: 457-462 
  10. Clancy JMS. Hawkins LF, Keller JC. Boyer DB. Bond strength and failure analysis of lightcured denture resins bonded to denture teeth. J Prosthet Dent 1991 :65:315-324 
  11. Vergani CE, Giampaolo ET, Cucci ALM. Composite occlusal surfaces for acrylic resin denture teeth. J Prosthet Dent 1997:77:328-331 
  12. Vergani CE, Giampaolo ET, Cucci ALM. Composite occlusal surfaces for acrylic resin denture teeth. J Prosthet Dent 1997:77:328-331 
  13. Stameisen AE. Ruffino A. Replacement of lost or broken denture teeth with composites. J Prosthet Dent 1987:58:119-120 
  14. Lipkin LS, Wescott T. Replacement of a fractured tooth on a removable partial denture by using two visible light-cured resin systems. J Prosthet Dent 1992:67:283-285 
  15. Chang JC, Katz ST. Composite denture teeth made on a removable partial metal framework. J Prosthet Dent 1994:71:409-412 
  16. Weiner S, Krause AS, Nicholas W. Esthetic modification of removable partial denture teeth with light-cured composites. J Prosthet Dent 1987: 57:381-384 
  17. Jooste C. Characterization of acrylic resin denture teeth. J Prosthet Dent 1992:67:279-280 
  18. Wyatt CCL, Harrop TJ, MacEntee MI. A comparison of physical characteristics of six hard denture reline materials. J Prosthet Dent 1986:55:343-346 
  19. Ogle RE. Sorensen SE, Lewis EA. A new visible light-cured resin system applied to removable prosthodontics. J Prosthet Dent 1986;56:497-50 
  20. Khan Z, Fraunhofer JA, Razavi R. The staining characteristics, transverse strength, and microhardness of a visible light-cured denture base material. J Prosthet Dent 1987: 57: 384-386 
  21. Arena CA Evans DB, Hilton TJ. A comparison of bond strengths among chairside hard reline materials. J Prosthet Dent 1993;70:126131 
  22. Mong-Sook Yang. Bond strength of various resins to denture teeth by surface treatment. J Korean Acad Prosthodont 1999;37:4250 
  23. Papazoglou E, Vasilas AI. Shear bond strengths for composite and autopolymerized acrylic resins bonded to acrylic resin denture teeth. J Prosthet Dent 1999;82:573-578 
  24. Shen C, Colaizzi FA Bims B. Strength of denture repairs as influenced by surface treatment. J Prosthet Dent 1984:52:844-848 
  25. Fletcher AM et a1. A method of improving the bonding between artificial teeth and PMMA. J Dent 1985:13:102-108 
  26. Civjan S, Huget EF, Simon LB. Modifications of the fluid resin technique. JADA 1972:85: 109-112 
  27. Buyukyilmaz S, Ruyter IE. The effects of polymerization temperature on the acrylic resin denture base-tooth bond. Int J Prosthodont 1997:10: 49-54 
  28. Rupp NW, Bowen RL, Paffenbarger GC. Bonding cold-curing denture base acrylic resin to acrylic resin teeth. JADA 1971;83:601-606 
  29. Vergani CE, Machado AL, Giampaolo ET, Pavarina AC. Effect of surface treatments on the bond strength between composite resin and acrylic resin denture teeth. Int J Prosthodont 2000; 13:383-386 
  30. Vallittu PK, Lassila VP, Lappalainen R. Wetting the repair surface with methyl methacylate affects the transverse strength of repaired heat-polymerized resin. J Prosthet Dent 1994:72:639-643 
  31. Sorensen SE, Fjeldstad E. Bonding of plastic teeth to acrylic resin denture base materials. J Dent Res 1961:40: 776 
  32. Spratley MH. An investigation of the adhesion of acrylic resin teeth to dentures. J Prosthet Dent 1987;58:389-392 
  33. Morrow RM, Matvias FM, Windeler AS, Fuchs RJ. Bondingof plastic teeth to two heatcuring denture base resins. J Prosthet Dent 1978: 39: 565-568 
  34. Beyli MS, Fraunhofer JA. Repair of fractured acrylic resin. J Prosthet Dent 1980;44:497-503 
  35. Huggett R John G, Jagger RG, Bates JF. Strength of the acrylic denture base tooth bond. Br Dent J 1982; 153: 187-190 
  36. Thean HPY, Chew CL, Goh KI. Shear bond strength of denture teeth to base:A comparative study. Quint Int 1996;27:425-428 
  37. Tachii D, Takahashi Y, Habu T. Composite resin tooth의 occlusal surfaces와 축성한 composite resin의 bond strength. QDT 1999;24:71-77 
  38. Frisch HL, Frisch KC, Klempner D. Interpenetrating polymer networks, Mod Plastics 1981, 58: 74 
  39. Brosh T, Pilo R, Bichacho N, Blutstein R. Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites. J Prosthet Dent 1997;77:122-126 
  40. Vallittu PK, Ruyter IE. The swelling phenomenon of acrylic resin polymer teeth at the interface with denture base polymers. J Prosthet Dent 1997:78:194-199 
  41. Anderson IN. The strength of the joint between plain and copolymer acrylic teeth and denture base resins. Br Dent J 1958;104:317-320 

이 논문을 인용한 문헌 (1)

  1. Park, Kyung-Mo 2014. "Study on shear bond strength of various composite resins to artificial denture teeth" 대한치과기공학회지 = The Journal of Korean academy of dental technology, 36(3): 171~177 

원문보기

원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일