최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.20 no.1 = no.142, 2003년, pp.107 - 117
이민철 (부산대학교 기계공학부, 정밀정형 및 금형가공 연구센터) , 정진영 (부산대학교 일반대학원 지능기계공학과) , 고석조 (동의공업대학 기계시스템계열) , 허창훈 (㈜케이디이컴)
Polishing a die that has free-form surfaces is a time-consuming and tedious job, and requires a considerable amount of high-precision skill. In order to reduce the polishing time and cope with the shortage of skilled workers, an automatic polishing robot system was developed. The polishing robot sys...
M. Kunieda, T. Nakagawa, and T. Higuchi, 'Robot Polishing of Curved Surface with Magnetically Pressed Polishing Tool,' JSPE, Vol. 54, No. 1, pp. 121-125, 1988
K. Saito, 'Finishing and Polishing of Free Form Surface,' Bulletin of Japan Society of Precision Engineering, Vol. 18, No. 2, pp. 104-109, 1984
K. Shunichi, A. Tojiro, and I. Ichiro, 'Development of a Robot-Polishing System (Polishing Force Control by Means of Fuzzy Set Theory),' JSME J. Series C, Vol. 57, No. 543, pp. 3714-3719, 1991
M. Suziki, S. Ichiyasu, K. Kirii, S. Sunahara, T. Sakuta, and A. Asai, 'Developement of Diefinishing Robotic System Controlled by CAD/CAM System,' JSPE-58-08, pp. 1309-1314, 1992
강성철, 김문상, 이교일, '금형 연마작업을 위한 로봇 오프라인 프로그래밍 시스템의 개발 및 적용,' 한국정밀공학회지, Vol. 14, No. 1, pp. 69-77, 1997
박삼진 외 8명, 3차원 곡면의 설계 및 가공 통합 시스템 개발, 최종보고서, 한국기계연구원, 1993
Polishing System $FP-{\alpha}$ Series, Nagasei, 1994
Sawada, Y., Intelligent Polishing System KM Series, Daikin, 1994
조현덕, 자유곡면을 위한 5-축 정밀가공에 관한 연구, 박사학위논문, 한국과학기술원
M. C. Lee, S. J. Go, M. H. Lee, C. S. Jun, D. S. Kim, K. D. Cha and J. H. An, 'A Robust Trajectory Tracking Control of a Polishing Robot System Based on CAM Data,' Int. J. of RCIM, Vol. 17:1-2, pp. 177-183, 2001
S. J. Go, and M. C. Lee, 'Development of a Controller for Polishing Robot Attached to Machining Center and Its Performance Evaluation,' Proc. of '98 KACC, pp. 346-352, 1998
DNC2 Manual, FANUC, 1996
K. S. Fu, R. C. Gonzlez and C. S. G. Lee, ROBOTICS: Control, Sensing, Vision and Intelligence, McGraw-Hill, 1987
곽준기, 백정렬, Inside Secrets Visual C++5.0, 삼각형, 1997
정재현, 곡면금형의 연마가공 시스템, 연구결과 보고서, 부산대학교 ERC/NSDM, 1995
※ AI-Helper는 부적절한 답변을 할 수 있습니다.