최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.20 no.2 = no.143, 2003년, pp.25 - 32
(전북대학교 대학원) , 이희관 (전북대학교 자동차부품 금형 TIC) , 양균의 (전북대학교 기계항공시스템공학부, 자동차부품 금형 TIC)
Molding properties of etched surface pattern are presented. Injection molding has given attention on improving dimensional accuracy and productivity. However, the molding of etched surface pattern on plastic parts is not researched relatively for its additional values, which can meet design function...
홍명웅, '사출성형기술 I ,' 기전연구사, pp. 32-33, 241, 1999
이국웅,'플라스틱기술,' 성안당, pp. 155, 175, 284, 1999
이성출, '플라스틱 사출성형 조건 CONTROL볍,' 기전연구사, pp. 76, 2001
조용무, '사출성형이론,' 일진사, pp. 175, 210, 2001
C. H., Kua, 'On the residual stress of thin-wall injection molded products,' 6th FADMA conference, No. 77, 2001
Qin zou, et al, 'Optimization of injection design part1: gate location optimization,' Polymer Engineering and Science, Vol. 30, No. 15, pp. 873- 882, 1990
C. Liu, et al, 'Process studies in precision injection molding-1: process parameters and precison,' Polymer Engineering and Science, Vol. 36, No. 1, pp. 1-9, 1996
M. Saeki, et al, 'Experimental investigation of surface roughness in ultra-precision cutting of plastics,' JSPE, Vol. 67, No. 2, pp. 311-315, 2001
H. Eberle, 'Micro-injection mould technology, kunstsoff plast europe,' pp. 1344-1346, 1998
T. H. Gwon, et al, 'Moldflow design guide - a resource for plastics engineers,' Bunundang Press, 2002
W. S. Tsou, 'C-mold design guide - injection mold,' wunjing press, 1999
C. W., Lee, et al, 'A knowledge-based CAD system for deliver design in injection molding,' KSPE, spring conference, pp. 723-726, 2001
C. W., Lee, et al, 'Intelligent design system for gate and runner in injection molding,' KSPE, Vol. 18, No. 9, pp. 192-203, 2001
S. J., Lin, et al, 'Optimizing the weldline strength of injection molded liquid crystal poymers,' 6th FADMA conference, No. 96, 2001
H. Hamada, et al, 'The V-notch at weld lines in polystyrene injection moldings,' Polymer Engineering and Science, Vol. 30, No. 15, pp. 931-936, 1990
A. K., Obrien-soucy, et al, 'Development of weld line strength in injection-molded polymethyle methacrylate,' J. of injection molding technology, Vol. 4, No. 3, pp. 152-158, 2000
Y. G. Son, et al, 'Weldline morphology of injection molded modified poly(phenylene-oxide)/ polymide-6 blends,' Polymer Engineering and Science, Vol. 41, No. 3, pp. 554-565, 2001
H. Hamada, et al, 'Effects of weldline on strength of fiber reinforced thermoplastics injection molding,' Kobunshi Ronbunshu, Vol. 44, No. 9, pp. 649-656, 1987
K. W. Cho, et al, 'Evaluation of the weldline strength of thermoplastics by compact tension test,' Polymer Engineering and Science, Vol. 37, No. 7, pp. 1217-1225, 1997
※ AI-Helper는 부적절한 답변을 할 수 있습니다.