본 논문에서는 금속증착 커패시터 소체내에서 발생하는 셀프힐링 특성을 연구 검토하였다. 커패시터에 정격전압 이상의 직류 전압으로 셀프힐링을 발생시켜 발생위치를 표정하였으며, 발생부위에 대해서는 전자주사현미경, 에너지 분산형 X선 분광기, 적외선분광기, 시차주사열량계를 사용하여, 셀프힐링 전·후 표면구조, 성분분석, 화학적 구조변화, 열적특성을 분석하였다. 실험 결과, 셀프힐링 발생시의 부산물은 주로 탄소 성분이었다. 건전시료와 셀프힐링 발생시료의 적외선 스펙트럼 분석은 유사하였으나, 500(%)에서 열처리된 시료의 적외선 스펙트럼 분석은 서로 달랐다. 시차주사열량계 분석결과 금속증착 폴리프로필렌필름의 건전시료와 셀프칠링 발생시료의 열량 피크는 서로 달랐다.
본 논문에서는 금속증착 커패시터 소체내에서 발생하는 셀프힐링 특성을 연구 검토하였다. 커패시터에 정격전압 이상의 직류 전압으로 셀프힐링을 발생시켜 발생위치를 표정하였으며, 발생부위에 대해서는 전자주사현미경, 에너지 분산형 X선 분광기, 적외선분광기, 시차주사열량계를 사용하여, 셀프힐링 전·후 표면구조, 성분분석, 화학적 구조변화, 열적특성을 분석하였다. 실험 결과, 셀프힐링 발생시의 부산물은 주로 탄소 성분이었다. 건전시료와 셀프힐링 발생시료의 적외선 스펙트럼 분석은 유사하였으나, 500(%)에서 열처리된 시료의 적외선 스펙트럼 분석은 서로 달랐다. 시차주사열량계 분석결과 금속증착 폴리프로필렌필름의 건전시료와 셀프칠링 발생시료의 열량 피크는 서로 달랐다.
This paper describes the characteristics of capacitor elements at self healing. Self healing events were forced to be created by the over-rated voltage of the capacitor elements. The self healing site was photographed by the Scanning Electron Microscope and the by-products of self healing were analy...
This paper describes the characteristics of capacitor elements at self healing. Self healing events were forced to be created by the over-rated voltage of the capacitor elements. The self healing site was photographed by the Scanning Electron Microscope and the by-products of self healing were analyzed by the Energy Dispersive X-ray Spectrometer. Also the self healing site was analyzed by the Differential Scanning Calorimeter and the Fourier Transform Infrared Spectrometer. As a result, the main component of by-products due to the hum cut at self healing was carbon. The Fourier Transform Infrared analysis result of the self-healing specimen was similar to that of the virgin specimen, however, different from that of the specimen thermally treated at 500$^{\circ}C$. It was observed that heat flow peaks of virgin specimen were different from self-healing specimen by the Differential Scanning Calorimeter analysis.
This paper describes the characteristics of capacitor elements at self healing. Self healing events were forced to be created by the over-rated voltage of the capacitor elements. The self healing site was photographed by the Scanning Electron Microscope and the by-products of self healing were analyzed by the Energy Dispersive X-ray Spectrometer. Also the self healing site was analyzed by the Differential Scanning Calorimeter and the Fourier Transform Infrared Spectrometer. As a result, the main component of by-products due to the hum cut at self healing was carbon. The Fourier Transform Infrared analysis result of the self-healing specimen was similar to that of the virgin specimen, however, different from that of the specimen thermally treated at 500$^{\circ}C$. It was observed that heat flow peaks of virgin specimen were different from self-healing specimen by the Differential Scanning Calorimeter analysis.
J.R. Laghari, et al., "Energy Storage Pulsed Power Capacitor Technology", Proceedings of the 34th International Power Sources Symposium, pp. 380-386, 1990,.
C.W. Reed, "The Fundamentals of Aging in HV Polymer-film Capacitors", IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 1, No.5, pp. 21-39, 1994.
Y. Makino, et al., "Measurements and Location Identification of Partial Discharge in Dry-type Metallized Polypropylene Film Capacitor", Japan-Korea Joint Symposium on ED&HVE, pp 265-268, 1999.
W.J. Sarjeant, et al., "Capacitors for High Power Electronics", Conference on Electrical Insulation and Phenomena, pp. 113-121, 1997.
H.N. Nagarmni, et al., "A Study of Electrical Endurance of MPPF Capacitors and Selection of End-point Criteria", IEEE Trans. on Electrical Insulation, Vol. 27 No. 6, pp. 110-118, 1992.
狩野順史, "ユンテンサ用フィルムの技術動向", OHM, pp. 36-40, 1998年 10月.
곽희로 외, "Analysis of Self-Healing in MPPF Capacitor Elements". 2001 Japan-Korea joint Symposium on ED&HVE, pp. 49-52, 2001.
AI-Helper
※ AI-Helper는 부적절한 답변을 할 수 있습니다.