참고문헌 (21)

1. German, R. M., 1984, Powder Metallurgy Science, Metal Powder Industries Federation, Princeton, New Jersey, USA 

2. Kuhn, H. A. and Ferguson, B. L., 1990, Powder Forging, Metal Powder Industries Federation, Princeton, New Jersey, USA 

3. Froes, F. H. et al., 1993, Light Material for Transportation system, Kim, N. J. Ed., Postech, Pohang, Korea, p. 27 

4. Ashely, S., 1991, 'Powder-Metal Forging : Connecting Rods That Crack by Desing,' Vol. 113, No. 2, p. 54 

5. German, R. M., 1990, Powder Injection Moulding, Metal Powder Industries Federation 

6. Bocchini, G. F., 1999, 'Warm Compaction of Metal Powder : Why It Works, Why It Requires a Sophisticated Enginerring Approach,' Powder Metal., Vol. 42, No. 2, pp. 171-180 

   상세보기

7. Sagawa, M., Nagata, H., Watanabe, T. and Itatani, O., 2000, 'Rubber Isostatic Pressing (RIP) of Powder for Magnets and Other Materials,' Materials and Design, Vol. 21, pp. 243-249 

   상세보기

8. Shima, S., Sakamoto Y. and Kotera, H. 2001, 'Simulation of Rubber Isostatic Pressing (RIP),' Recent Developments in Computer Modeling of Powder Metallurgy Process. IOS press, pp. 217-227 

9. Peng, S. H. and Chang, W. V., 'A Compressible Approach in Finite Element Analysis of Rubber Elastic Materials,' Comp.& stru., Vol. 62, pp. 573-593 

   상세보기

10. Kim, H. G., Lee, J. W. and Kim, K. T., 2001, 'The Effect of a Rubber Mould on Densification and Deformation of Metal Powder Compact during Cold Isostatic Pressing,' Mat. Sci. Eng. A318, pp. 174-182 

11. Yang, H. C., Lee, J. W. and Kim, K. T., 2001, 'The Effect of a Rubber Mould on Densification and Deformation of Metal Powder during Warm Isostatic Pressing,' EURO PM2001, Vol. 3, pp. 172-177 

12. Ogden, R. W., 1984, Non-linear Elastic Deformation, Wiley, New York 

13. ABAQUS User's I, II and III Manual, 2001, Ver. 6.2, H.D. Hibbitt, I. Karlsson and E.P. Sorenson, USA 

14. Yeoh, O. H., 1994, 'Some Forms of the Strain Energy Function for Rubber,' Rubber Chern. Tech. Vol. 67, pp. 481-503 

    상세보기

15. Lee, S. C. and Kim, K. T., 2002, 'Densification Behavior of Aluminum Alloy Powder under Cold Compaction,' Int. J. Mech. Sci., Vol. 44, pp. 1295-1308 

    상세보기

16. Shima, S. and Oyane, M., 1976, 'Plasticity Theory for Porous Metals,' Int. J. Mech. Sci., Vol. 18, pp. 285-291 

    상세보기

17. Boyer, H. E., 1987, 'Hardness Testing,' ASM International 

18. Abe, O., Kanzaki, S. Ohashi, M., Tabata, H., 1987, Sintering 87 Proceedings of the international institute for the Science of Sintering Symposium, Tokyo, Japan 

19. Anil, K. Bhowmick and Howard L. Stephen, 1988, Handbook of elastomers new developments and technology, New York, M. Dekker, pp. 475-481 

20. Shin, S. J., Lee, T. S. and Oh, S. I., 1998, 'Threedimensional Finite Element Analysis of Rubber Pad Deformation-Part I: Development of Implicit and Explicit Methods,' Transactions of the KSME, A, Vol. 22, No. 1, pp. 111-120 

    원문보기 상세보기

21. Shin, S. J., Lee, T. S. and Oh, S. I., 1998, 'Three-dimensional Finite Element Analysis of Rubber Pad Deformation- Part II: Applications,' Transactions of the KSME, A, Vol. 22, No. 1, pp.121-131 

    원문보기 상세보기

저자의 다른 논문 :

김종광 (1) 김기태 (44)