최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of automotive technology, v.4 no.3, 2003년, pp.119 - 124
Hwang, J.S. (Department of Agricultural Machinery Engineering, Chungbuk National University) , Ha, J.S. (Department of Agricultural Machinery Engineering, Chungbuk National University) , No, S.Y. (Department of Agricultural Machinery Engineering, Chungbuk National University)
Dimethyl Ether (DME) is an excellent alternative fuel that provides lower particulate matter (PM) than diesel fuel under the same engine operating conditions. Spray characteristical of DME in common rail injection system were investigated within a constant volume chamber by using the particle motion...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Chang, C. T. and Farrell, P. V. (1997). Effects of fuel viscosity and nozzle on high injection pressure diesel spray charactehstics. SAE Paper No. 970353
Chikachisa, T., Hishinuma, Y. and Ushida, H. (2002)Mixing condifions with spray-jet interaction for effective soot reduction in diesel combustion. Int. J. Automotive TechnoIogy 3,1, 17-25
Dan, T., Yamamoto, T., Senda, J. and Fujimoto, H. (1997). Effect of nozzle configurations for characteristics of non-reacting diesel fuel spray. SAE Paper No. 970355
Hiroyasu, H. and Arai, M. (1990). Structures of fuel spray in diesel engines. SAE Paper No. 900475
Huai, T.. Durbin. T. D.. Rhee. S. H. and Norbeck, J. M. (2003). Investigation of emission rates of ammonia, nitrous oxide and other exhaust compounds from alternative-fuel vehicles using a chassis dynamcmeter. Int. J. Automotive Technotogy 4,1,9-18
Kajitani, S., Oguma, M. and Mori, T. (2000). DME fuel blends for low-emission, direct-injection diesel engines. SAE Paper No. 2000-01-2004
Oguma, M., Hyun, G., Alam, M., Goto, S. and Kajitani, S. (2001). Effect of ambient pressure on atomization characteristics of dimehtyl ether. Proc. of the 6th Annual Conference on Liquid Atomization and Spray Systems-Asia, 11-13 Oct., Busan, Korea, 196-231
Oh, S. K., Baik, D. S. and Han, Y. C. (2002). c. Int. J. Automotive Technotogy 3, 3, 111-115
Sorenson, S. C., Bek, B. H., Glensvig, M. and Abeata, D. L. (1998). Dimethyl ether injection studies. Proc. of the Second Int. Workshop on Advanced Spray Com-bustion. 24-26 Nov., Hiroshima, Japan, 151-164
Wakai, K., Nishida, K., Yoshizaki, T. and Hiroyasu, H. (1999). Spray charactehstics of dimethyl ether from a DI diesel injection nozzle. Trans. of JSAE 30, 1, 41-47
Xu, M., Nishida, K. and Hiroyasu, H. (1992). A practical calculation method for injection pressure and spray penetration in diesel engines. SAE Paper No. 920624
Yoshijaki, T., Wakai, K., Nishida, K. and Hiroyasu, H. (1998). Experimental and numedcal analysis on spray tip penetration of DME spray. 7th Symposium (ILASS-Japan) on Atomiwtion, 21-23 Dec., Gunma University. Japan, 184-188
※ AI-Helper는 부적절한 답변을 할 수 있습니다.