최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.20 no.10 = no.151, 2003년, pp.31 - 40
류시형 (서울대학교 공학연구소) , 최덕기 (강릉대학교 정밀기계공학과) , 주종남 (서울대학교 기계항공공학부)
In this paper, optimal cutting condition to minimize the form error in side wall machining with a flat end mill is studied. Cutting forces and tool deflection are calculated considering surface shape generated by the previous cutting such as roughing. Using the form error prediction method from tool...
Martellotti, M. E., 'An Analysis of the Milling Process,' Trans. ASME, Vol. 63, pp. 677-700, 1941
Martellotti, M. E., 'An Analysis of the Milling Process, Part Ⅱ-Down Milling,' Trans. ASME, Vol. 67, pp. 233-251, 1945
Merchant, M. E., 'Basic Mechanics of the Metal Cutting Process,' Trans. ASME, J. of App. Mech., Vol. 11, pp. 168-175, 1944
Stabler, G. V., 'The Fundamental Geometry of Cutting Tools,' Proc. of the Inst. of Mech. Eng., Vol. 165, pp. 14-26, 1951
Kline, W. A., DeVor, R. E., and Lindberg, J. R., 'The Prediction of Cutting Forces in End Milling with Application to Comering Cuts,' Int. J. Mach. Tool Design Research, Vol. 22, pp. 7-22, 1982
Kline, W. A., and DeVor, R. E., 'The Effect of Runout on Cutting Geometry and Forces in End Milling,' Int. J. Mach. Tool Design Research, Vol. 23, pp. 123-140, 1983
Kline, W. A., DeVor, R. E., and Shareef, I. A., 'The Prediction of Surface Accuracy in End Milling,' ASME J. of Eng. for Ind., Vol. 104, pp. 272-278, 1982
Sutherland, J. W., and DeVor, R. E., 'An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems,' Trans. ASME J. of Eng. for Ind., Vol. 108, pp. 269-279, 1986
Ryu, S. H., 'Optimal Cutting Condition is Side Wall Machining Considering Tool Deflection,' Ph.D Thesis, Seoul Nat'l Univ., 2000
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.