다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Journal of the Optical Society of Korea, v.7 no.3, 2003년, pp.150 - 155
Jeoung, Sae-Chae (Laser Metrology Laboratory, Korean Research Institute of Standards and Science) , Choi, Jun-Rye (Laser Metrology Laboratory, Korean Research Institute of Standards and Science) , Park, Myung-Il (Laser Metrology Laboratory, Korean Research Institute of Standards and Science) , Park, Mi-Ra (Laser Metrology Laboratory, Korean Research Institute of Standards and Science) , Choi, Dae-Sik (Laser Metrology Laboratory, Korean Research Institute of Standards and Science)
AI-Helper
Femtosecond laser ablation mechanism was systematically investigated on sodalime glass in ambient conditions. The ablation crater diameter was measured for varying numbers of laser pulses as for varying well as the laser fluence. The analysis of the results with a one dimensional spatial Gaussian fl...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
P. P. Pronko, S. K. Dutta, J. Squier, J. V. Rudd, D. Du, and G. Mourou, “Machining of sub-micron holes using a femtosecond Laser at 800 nm,” Optics Comm., vol. 114, pp. 106-110, 1995.
T. Juhasz, R. Kurtz, C .Horvath, C. Suarez, F. Raks, and G. Spooner, “Photonic device fabrication with femtosecond laser oscillators,” Optics & Photonics News, vol. 24, pp. 55-49, 2002.
K. Minoshima, A.M. Kowalwviz, I. Hartl, E.P. Ippen, and J.G. Fujimoto, “Photonic device fabrication with femtosecond laser oscillators,” Optics & Photonics News, vol. 14, pp. 44-49, 2003.
F. Korte, J. Serbin, J. Kochi, A. Egbert, C. Fallnich, A. Ostendorf, and B.N. Chichkov, “Towards nanostructuring with femtosecond laser pulses,” Appl. Phys. A, vol.77, pp. 229-235, 2003.
R. Haight, D. Hayden, P. Longo, T. Neary, and A. Wagner, “Implementation and performance of a femtosecond laser mask repair system in manufacturing,” Pro. SPIE, issue. 3546, pp. 477-484, 1998.
Y. Shani, I. Melnick, S. Yoffe, Y. Sharon, K. Liebermann, and H. Terkel, “High-resolution near-field mask repair with femtosecond laser,” Pro. SPIE, issue. 3546, pp. 112-120, 1998.
J. Serbin, T. Bauer, C. Fallnich, A. Kasenbacher, and W. H. Arnold, “Femtosecond laser as novel tool in dental surgery,” Appl. Surf. Sci., vol. 197-198, pp. 737-740, 2002.
B. N. Chickkov, C. Momman, S. Nolte, F. Von Alvenslebe, and A. Tunnermann, “Femtosecond, picosecond and nanosecond laser ablation of solids,” Appl. Phys. A, vol. 63, pp. 109-115, 1996.
D. Ashkenasi, G. Muller, A. Rosenfeld, R. Stoian, I. V. Hertel, N. M. Bugakova, and E. E. B. Campbell, “Fundamentals and advantages of ultrafast microstructuring of transparent materials,” Appl. Phys. A, vol. 77, pp. 223-228, 2003
K. Venkatakrishinan, B. Tan, and N. R. Sivakumar, “Sub-micron ablation of metalic thin film by femtosecond pulse laser, ” Optics & Laser Technol., vol. 34, pp. 575-578, 2002.
X. Liu, D. Du, and G. Mourou, “Laser ablation and micromachining with ultrashort laser pulses,” IEEE J. Quantum Electron, vol. 33, pp. 1706-1716, 1997.
Y. Hirayama and M. Obara, “Heat effects of metals ablated with femtosecond laser pulses,” Appl. Surf. Sci., vol. 197-198, pp. 741-745, 2002.
D. Y. Tzou, J. K. Chen, and J. E. Beraun, “Hotelectron blast induced by ultrashort-pulsed lasers in layered media,” Int. J. Heat and Mass Trans., vol. 45, pp. 3369-3382, 2002.
A. Chimmalgi, T. Y. Choi, C. P. Grigoropoulos, and K. Komvopoulos, “Femtosecond laser apertureless near-field nanomachining of metals assisted by scanning probe microscopy,” Appl. Phys. Lett., vol. 82, pp. 1146-1148, 2003.
R. A. House II and A. H. Guenther, Laser Induced Damage in Optical Materials (NBS Spec. Pub., 1976), pp. 338-340.
M. Li, M. Ishizuka, X. Liu, Y. Sugimoto, N. Ikeda, and K. Asakawa, “Nanostructuring in submicronlevel waveguides with femtosecond laser pulses,” Opt. Comm., vol. 212, pp. 159-163, 2002.
W. Koshinski, A. Schirmacher, and E. Sutter, “Induced transmittance of eye-protective laser filters,” J. Laser Appl., vol. 10, pp. 126-130, 1998.
J. Kruger, M. Lenzner, S.Martin, M. Lenner, C. Spielmann, A. Fiedler, and W. Kautek, “Single-and multipulse femtosecond laser ablation of optical filter materials,” Appl. Surf. Sci., vol. 208-209, pp. 233-237, 2003.
S. Nolte, C. Momma, H. Jacobs, A. Tunnermann, B. N. Chichkov, B. Wellegehausen, and H. Welling, “Ablation of metals by ultrashort laser pulses,” J. Opt. Soc. Am. B, vol. 14, pp. 2716-2722, 1997.
S. S. Wellershoff, J. Hohlfeld, J. Gudde, and E. Matthias, “The role of electron-phonon coupling in femtosecond laser damage of metals,” Appl. Phys. A, vol. 69, pp. S99-S107, 1999.
R. Stoian, M. Boyle, A. Thoss, A. Rosenfeld, G. Korn, I. V. Hertel, and E. E. B. Campbell, “Laser ablation of dielectrics with temporally shaped femtosecond pulses,” Appl. Phys. Lett., vol. 80, pp. 353-355, 2002.
E. G. Gamaly, A. V. Rode, and B. Luther-Davies, “Ablation of solids by femtosecond laser: ablation mechanism and ablation thresholds for metals and dielectrics,” Phys. Plasmas, vol. 9, pp. 949-957, 2002.
R. Stoian, D. Ashkenasi, A. Rosenfeld, and E. E. B. Campbell, “Coulomb explosion in ultrashort pulsed laser ablation of $Al_2O_3$ ,” Phys. Rev. B, vol. 62, pp. 13167-13173, 2001.
S. Preuss, A. Demchuk, and M. Stuke, “Subpicosecond UV laser ablation of metals,” Appl. Phys. A, vol. 61, pp. 33-37, 1995.
J. Kruger and W. Kautek, “In Laser-Induced Thin Film Processing,” J. J. Dubowski, Ed. Proc. SPIE, vol. 2403, pp. 436-439, 1995.
S. Kim, D. W. Chang, S. Y. Park, S. C. Jeoung, and D. Kim, “Excited-state intramolecular proton transfer and stimulated emission from phototautomerizable
M. Lenzner, J. Kruger, S. Sartania, Z. Cheng, C. Spielmann, G. Mourou, W. Kautek, and F. Krausz, “Femtosecond optical breakdown in dielectrics,” Phys. Rev. Lett., vol. 80, pp. 4076-4079, 1998.
W. Kautek and J. Kruger, “Laser ablation of dielectrics with pulse durations between 20 fs and 3 ps,” Appl. Phys. Lett., vol. 69, pp. 3146-3148, 1996.
P. Rudolph, J. Bonse, J. Kruger, and W. Kautek, “Femtosecond- and nanosecond-pulse laser ablation of bariumalumoborosilicate glass,” Appl. Phys. A, vol. 69, pp. S763-S766, 1999.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.