최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.27 no.10 = no.217, 2003년, pp.1800 - 1808
This work deals with the electrical conductivity of dielectric on output parameters such as metal removal rate and surface roughness value of a carbon steel(SM25C) and sintered carbides cut by wire-electrical discharge machining(W-EDM). Dielectric has several functions like insulation, ionization, c...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kang, S. H., Park, W. J. and Bae, S. H., 1993, 'A Study on Discharge GAp in CAD/CAM Wire Electric Discharge Mchining,' Trans. of KSME, Vol. 17, No. 2, pp. 380-384
McGeough, J. and Rasmussen, H., 1977, 'A Theretical Model of Electrodischarge Texturing,' J. of Materials Processing Technology, Vol. 68, pp. 172-178
Kunieda, M., and Yanatori, K., 1996, 'Study on Debris Movement in EDM Gap,' Int'l J. of Electrical Machining(IJEM), No. 2, pp. 43-49
Schumacher, B. M., and Agie, A. G., 1990, 'About the Role of Debris in the Gap During Electrical Discharge Machining,' Annals of the CIRP, Vol. 39, No. 1, pp. 197-199
Luo, Y. F., 1997, 'The Dependence of Interface Discharge Transitivity upon the Gap Debris in Precision Electrodischarge Machining,' J. of Materials Processing Technology, Vol. 68, pp. 121-131
Furutani, K., Saneto, A., Takezawa, H., Mohri, N. and Miyake, H., 2001, 'Accretion of Titanium Carbide by Electrical Discharge Machining with Power Suspended in Working Fluid,' J. of Int'l Scientist for Precision Engineering and Nanotechnology, Vol. 25, pp. 138-144
Dunnebacker, G., 1992, 'High Performance Electrical Discharge Machining using Water-based Dielectric,' Proc. of the 10th Int'l. Symp. for Electromachining (ISEM-X), pp. 161-169
Bichsel, D. and Kocher, M., 1998, 'Contamination Evolution in EDM Sinking,' Proc. of the 12th Int'l. Symp. for Electromachining (ISEM-XII), pp. 351-358
Charmilles Technologies Co., 1993, Operating Manual
Cornelissen, H., Snoeys, R., and Kruth, J. P., 1977, 'Investigation on the Optimal Machining Conditions for Electro-Discharge Machining of Cemented Carbides,' 5th North American Metalworking Research Conference(NAMRC-V), pp. 258-263
Kim, C. H. and Kruth, J. P., 2002, 'Influence of the Electrical Conductivity of Dielectric on Machinability of WEDM,' Trans. of KSME (A), Vol. 26, No. 2, pp. 322-328
Kim, C. H. and Kruth, J. P., 2001, 'Influence of the Electrical Conductivity of Dielectric on WEDM of Sintered Carbide,' KSME Int'l Journal, Vol. 15, No. 12, pp. 1676-1682
Maggi, F., 1991, 'Wire cut Electro-Erosion of Hard Metals,' Agie Erosion Technology, pp. 1-8
Kobashi, K., 1995, 'The Present and Future Developments of EDM & ECM,' Proc. of the 10th Int'l. Symp. for Electromachining(ISEM-XI), pp. 161-169
Gadalla, A. M., and Tsai, W., 1989, 'Electrical Discharge Machining of Tungsten Carbide-Cobalt Composites,' J. of American Ceramic Society, Vol. 72, No. 8, pp. 1396-1401
Kim, M. G., Ki, J. K, and Tai, W. P., 1993, 'Fatigue Fracture Characteristics at a Electrio Discharge Mchinied Surface in High Strength Steel,' Trans. of KSME, Vol. 17, No. 1, pp. 21-26
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.