최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.20 no.7 = no.148, 2003년, pp.227 - 232
김재현 (서울대학교 대학원 기계항공공학부) , 김보현 (서울대학교 대학원 기계항공공학) , 류시형 (서울대학교 대학원 기계항공공학) , 주종남 (서울대학교 기계항공공학부)
In order to make a deep and precise micro-hole, electrode wear and clearance between the electrode and the workpiece are important parameters using micro-electrical discharge machining. In this study, experiments were carried out to show the characteristics of electrode wear and radial clearance wit...
Masuzawa, T., Tsukamoto, J. and Fujino, M., 'Drilling of Deep Microholes by EDM,' Annals of the CIRP, Vol. 38, No. 1, pp. 195-198, 1989
Masuzawa, T., Kuo, C.-L. and Fujino, M., 'Drilling of Deep Microholes by EDM Using Additional Capacity,' Int. J. of the Japan Society of Precision Engineering, Vol. 24, No. 4, pp. 275-276, 1990
Kagaya, K., Oishi, Y. and Yada, K., 'Micro-electrodischarge Machining Using Water as A Working Fluid - I : Micro-hole Drilling,' Precision Engineering, Vol. 8, No. 3, pp. 157-162, 1986
Yan, B. H., Huang, F. Y, Chow, H. M. and Tsai, J. Y, 'Micro-hole Machining of Carbide by Electric Discharge Machining,' Journal of Materials Processing Technology, Vol. 87, pp. 139-145, 1999
※ AI-Helper는 부적절한 답변을 할 수 있습니다.