$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

상악전치 후방 견인시 견인 loop후방에 부여한 gable bend 양에 따른 치아이동 양상에 관한 연구
A study on the effect of the magnitude of the gable bends on the tooth movement pattern during on-masse space closure in the maxillary dentition 원문보기

대한치과교정학회지 = Korean journal of orthodontics, v.34 no.1 = no.102, 2004년, pp.33 - 45  

전윤식 (이화여자대학교 의과대학 치과학 교실) ,  노준 (이화여자대학교 의과대학 치과학 교실) ,  정상혁 (이화여자대학교 의과대학 예방의학교실) ,  김희정 (이화여자대학교 의료원 부속 목동병원 교정과)

초록
AI-Helper 아이콘AI-Helper

제 1소구치가 발치된 증례에서 bull loop를 견치 직후방에 제작한 후 gable bend를 어느 정도 부여할 때 전치부의 효과적인 치축조절과 후방 이동량을 극대화 할 수 있는지를 입체적으로 확인하는 것이 본 연구의 목적이다. 제 1소구치가 제거된 상악우측 인공 치조골부에 중절치부터 제 2대구치까지 실험용 치아들을 식립하였다. 그 후 bull-loop가 형성된 반쪽 호선에 $10^{\circ},\;20^{\circ},\;30^{\circ}$의 gable bend를 부여한 후 3전치를 후방 견인하여 발치공간을 폐쇄시켰고 이러한 실험과정을 각 군마다 3회씩 반복 실험하였다. 발치공간이 폐쇄된 후 실험전, 후의 교합방사선 사진상에 촬영된 전치부와 구치부의 시상면과 교합면 상에서의 각 군별 치아이동 양상을 일요인 분산분석(ANOVA)과 Scheffe 검정으로 평가한 결과 아래와 같은 결론을 얻었다. 1. Gable bend의 양이 증가할수록 전치부의 치축은 치체이동 양상을 보였으며 후방 이동량도 증가하였다. 2. Gablebend의 양이 증가할수록 구치부의 전방 이동량은 감소하였으나 수직적 압하량 및 협측 이동량은 증가하였다(p<0.001). 3. 발치공간에 인접한 견치의 원심회전과 제 2소구치의 근심회전에 의해 악궁의 조화가 이루어졌다(p<0.001).

Abstract AI-Helper 아이콘AI-Helper

The purpose of this experimental study was to determine appropriate magnitude of the Gable bends to produce maximum retraction of the anterior teeth. The Calorific Machine was used to illustrate the tooth movement in three dimension. The experimental teeth except the first premolar were embedded in ...

주제어

참고문헌 (22)

  1. 김형돈, 박영철. 제1소구치 발치를 동반한 제1급 치조성 양악 전돌증 환자의 치료 전후 비교에 관한 연구. 대치교정지 1994 : 24 : 149-59 

  2. 손병화, 박영철. 제1소구치 발치를 동반한 교정치료 환자의 치아 및 연조직 변화에 관한 연구. 대치협회지 1984 : 22 : 429-38 

  3. 장영일, 이유현. 제1소구치 발치가 수반된 Class I 전돌증례의 치료전후 변화. 대치교정지 1996 : 26 : 487-95 

  4. Talass MF, Talass L, Baker RC. Soft tissue profile changes resulting from retraction of maxillary incisors. Am J Orthod Dentofacial Orthop 1987 : 91 : 385-9 

  5. Burstone CJ. The segmental arch approach to space closure. Am J Orthod 1982 : 82 : 361-78 

  6. Staggers JA, Germane N. Clinical considerations in the use of retrac-tion mechanics. J Clin Orthod 1991 : 25 : 364-9 

  7. Braun S, Garcia JL. The gable bend revisited. Am J Orthod Dento-facial Orthop 2002 : 122 : 523-7 

  8. Drescher D, Bourauel C, Their M. Application of the orthodontic mea-surement and simulation system(OMSS) in orthodontics. Eur J Orthod 1991 : 13 : 169-78 

  9. Ogura M. Yamagata K. Kubota S. 'et al' Comparision of tooth move-ments using friction-free and preadjusted edgewise bracket system. J Clin Orthod 1996 : 30 : 325-30 

  10. Rhee JN, Chun YS, Row J. A comparison between friction and fric-tionless mechanics with a new typodont simulation system. Am J Orthod Dentofacial Orthop 2001 : 119 : 292-9 

  11. Siatkowski RE. Loss of anterior torque control due to variations in bracket slot and archwire dimensions. J. Clin. Ortho. 1999 : 33 : 508-10 

  12. Creekmore TD. Dr. Thomas D. Creekmore on torque. J Clin Orthod. 1979 : 13 : 305-10 

  13. Creekmore TD, Kunik RL. Straight wire : the next generation. Am J Orthod Dentofacial Orthop 1993 : 104 : 8-20 

  14. Burstone CJ, Koenig HA. Creative wire bending-The force system from step and v bends. Am J Orthod Dentofacial Orthop 1988 : 93 : 59-67 

  15. Siatkowski RE. Continuous arch wire closing loop design, optimization and verification. Part II. Am J Orthod Dentofacial Orthop 1997 : 112 : 487-95 

  16. Kusy RP, Tulloch JFC. Analysis of moment/force ratios in the mecha-nics of tooth movement. Am J Orthod Dentofacial Orthop 1986 : 90 : 127-31 

  17. Tanne K, Koenig HA, Burstone CJ. Moment to force ratios and the center of rotation. Am J Orthod Dentofacial Orthop 1988 : 94 : 426-31 

  18. Ronay F, Kleinert W, Melsen B, Burstone CJ. Force system developed by v bends in an elastic orthodontic wire. Am J Orthod Dentofacial Orthop 1989 : 96 : 295-301 

  19. Kusnoto B. Evans CA. Reliablity of a 3D surlace laser scanner for ortbodontic application. Am J Ortbod Dentofacial Orthop 2002 : 122 : 342-8 

  20. Hayashi K, Uechi J, Mizoguchi I. Three-dimensional analysisof dental casts based on a newly defined palatal reference plane. Angle Orthod. 2003 : 73 : 539-44 

  21. Bailey LT, Esmailnejad A, Almedia MA. Stability of the palatal rugae as landmarks for analysis of dental casts in extraction and non-extraction cases Angle Orthod 1996 : 66 : 73-8 

  22. Wehrbein H, Fuhrmann RA, Diedrich PR. Periodontal conditions after facial root tipping and palatal root torque of incisors. Am J Orthod Dentofacial Orthop 1994 : 106: 455-62 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로