최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.21 no.6 = no.159, 2004년, pp.43 - 51
류시형 (전북대학교 기계항공시스템공학부) , 주종남 (서울대학교 기계항공공학부)
A method for form error prediction in side wall machining with a flat end mill is suggested. Form error is predicted directly from the tool deflection without surface generation by cutting edge locus with time simulation. Developed model can predict the surface form error about three hundred times f...
Martellotti, M. E., 'An Analysis of the Milling Process,' Trans. ASME, Vol. 63, pp. 677-700, 1941
Martellotti, M. E., 'An Analysis of the Milling Process, Part II-Down Milling,' Trans. ASME, Vol. 67, pp. 233-251, 1945
Merchant, M. E., 'Basic Mechanics of the Metal Cutting Process,' Trans. ASME, J. of App. Mech., Vol. 11, pp. 168-175, 1944
Koenigsberger, F. and abberwal, A. J. P., 'An Investigation into the Cutting Force Pulsations during Milling Operations,' Int. J. Mach. Tool Design Research, Vol. 1, pp. 15-33, 1961
Koenigsberger, F. and Pal, A. K. P., 'Some Aspects of the Oblique Cutting Processs,' Int. J. Mach. Tool Design Research, Vol. 8, pp. 45-57, 1968
Kline, W. A., DeVor, R .E. and Shareef, I. A., 'The prediction of Surface Accuracy in End Milling,'ASME J. of Eng. for Ind., Vol. 104, pp. 272-278, 1982
Sutherland, J. W. and DeVor, R. E., 'An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems,' Trans. ASME, J. of Eng. for Ind., Vol. 108, pp. 269-279, 1986
Kline, W. A., DeVor, R. E. and Linderg, J. R., 'The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts,' Int. J. Mach. Tool Design Research, Vol. 22, pp. 7-22, 1982
Kline, W. A. and DeVor, R. E., 'The Effect of Runout on Cutting Geometry and Forces in End Milling,' Int. J. Mach. Tool Design Research, Vol. 23, pp. 123-140, 1983
※ AI-Helper는 부적절한 답변을 할 수 있습니다.