최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.21 no.6 = no.159, 2004년, pp.60 - 68
장동규 (전북대학교 대학원 기계공학과) , 신재광 (전북대학교 대학원 기계공학) , 홍성균 (전북대학교 대학원 기계공학) , 이희관 (전북대학교 자동차부품ㆍ금형기술혁신센) , 양균의 (전북대학교 기계항공시스템공학부)
This paper presents a method fur impeller modeling and 5-axis machining by the reverse engineering. The impeller is composed of pressure surface, suction surface and leading edge, and so on. The surfaces can be modeled by using the characteristic curves such as hub curves, shroud curves and fillet c...
Jun, Y. T., Park, S. H., 'Development of a CAM system for Impeller Machining,' Proceedings of the KSME Spring Annual Meeting, pp. 217-220, 1994
Cho, H. D., Park, J. B., Yoon, M. C., Choi, D. S., Shin, B. S., Lee, S. C., 'A Study on the 5-Axis CNC Machining of Impeller,' Journal of the Korean Society of Machine Tool Engineers, Vol. 6, No. 4, pp. 19-26, 1997
Varady, T., Matrin, R. R., Cox, J., 'Reverse engineering of geometric models - an introduction,' Computer-Aided Design, Vol. 29, No. 4, pp. 255-268, 1997
Jun, C. S., Park, J. S., 'Development of dedicated CAM system for turbine blades,' Proceedings of the Sociery of CAD/CAM Engineers Annual Meeting, pp. 181-186, 2001
Lee, C. S., Lee,J . H., Park, S. D., 'Generation of 4-axis NC Data for Single Setup of Ship's Propeller Machining,' Proceedings of the Society of CAD/CAM Engineers Annual Meeting, pp. 187-194, 2001
Cho, H. D., Jung, D. I., Yoon, M. C., Choi, D. S., Shin, B. S., Lee, E. S., Dong, Y. G., 'The Development of Exclusive CAD/CAM System for Impeller Blades Formed by Ruled Surface II (A Study on the 5-axis Machining),' Journal of the Korean Society of Machine Tool Engineers, Vol. 11, No. 3, pp. 1-7, 2002
Jang, D. K., Shin, J. K., Lee, H. K., Ryo, S. H., Yang, G. E., 'A Study on Tool Path Generation for Machining Impellers with 5-Axis Machine,' Asia-Pacific Forum on PSFDT, pp. 253-261, 2003
Chen, S. L., Wang, W. T., 'Computer aided manufacturing technologies for centrifugal compressor impellers,' Jounal of Materials Processing Technology, Vol. 115, pp. 284-293, 2001
Lin, C. Y., Liou, C. S., Lai, J. Y., 'A surface-lofting approach for smooth-surface reconstruction from 3D measurement data,' Computer in Industry, Vol. 34, pp. 73-85, 1997
Park, H. J., Kim, K. S., 'Approximate lofting by B-spline curve fitting based on energy minimization,' Journal of the Society of CAD/CAM Engineers, Vol. 4, No. 1, pp. 32-42, 1999
Rogers, D. F., Adams, J. A., 'Mathematical Elements for Computer Graphics,' McGAW-HILL Int. Editions pp. 348-351, 1990
※ AI-Helper는 부적절한 답변을 할 수 있습니다.