해상 어류가두리양식장의 환경영향 평가: II. 가두리 양식장 퇴적물의 산소-황화수소 경계면에서 황화수소의 산화율 및 무산소 퇴적층에서 황산염 환원율 추정 Environmental Impact Assessment by Marine Cage Fish Farms: II. Estimation of Hydrogen Sulfide Oxidation Rate at $O_2$-H$_2$S Interface and Sulfate Reduction Rate in Anoxic Sediment Layer원문보기
유기물이 많이 유입되는 해상어류가두리 양식장 퇴적물에서 전극 크기가 25$mu extrm{m}$인 미세전극을 이용하여 공극수의 산소, 황화수소, pH의 미세연직 농도를 측정하였다. 산소와 황화수소의 연직분포에서 얻어진 미세구간에 1차 확산ㆍ반응모델을 적용하여 각 구간에서의 산소 소모율, 황화수소 산화율, 황산염의 환원율을 추정하였다. 산소투과깊이는 0.75 mm였으며, 미세구간은 상부와 하부층 2개로 나누어졌다. 산소소모는 황화수소의 산화 영향으로 상부층에 비해 하부층에서 높았고 총산소소모플럭스는 0.092 $\mu$mol $O_2$$cm^{-2}$$hr^{-1}$였다. 산화층에서 황화수소 산화는 0.7 mm 두께에서 0.030$\mu$mo1 H$_2$S $cm^{-2}$$hr^{-1}$의 결과를 나타냈으며, 이 곳에서 황화수소의 turnover time은 약 2분으로 화학적 산화와 생물학적 산화가 동시에 일어나고 있었다. 황화수소와 산소의 소모율 비는 0.84로 황화수소 산화에 산소 이외의 다른 전자수용체가 사용되거나 산소-황화수소 경계면 주변에서 황 침전의 가능성을 시사하고 있었다. 추정된 총 황산염 환원 플럭스는 0.029$\mu$mol $cm^{-2}$$hr^{-1}$로서 총산소소모플럭스의 60% 이상을 차지하고 있어 무산소 환경에서 유기물 분해가 산화환경에서보다 큰 역할을 하는 것으로 나타났다.
유기물이 많이 유입되는 해상어류가두리 양식장 퇴적물에서 전극 크기가 25$mu extrm{m}$인 미세전극을 이용하여 공극수의 산소, 황화수소, pH의 미세연직 농도를 측정하였다. 산소와 황화수소의 연직분포에서 얻어진 미세구간에 1차 확산ㆍ반응모델을 적용하여 각 구간에서의 산소 소모율, 황화수소 산화율, 황산염의 환원율을 추정하였다. 산소투과깊이는 0.75 mm였으며, 미세구간은 상부와 하부층 2개로 나누어졌다. 산소소모는 황화수소의 산화 영향으로 상부층에 비해 하부층에서 높았고 총산소소모플럭스는 0.092 $\mu$mol $O_2$$cm^{-2}$$hr^{-1}$였다. 산화층에서 황화수소 산화는 0.7 mm 두께에서 0.030$\mu$mo1 H$_2$S $cm^{-2}$$hr^{-1}$의 결과를 나타냈으며, 이 곳에서 황화수소의 turnover time은 약 2분으로 화학적 산화와 생물학적 산화가 동시에 일어나고 있었다. 황화수소와 산소의 소모율 비는 0.84로 황화수소 산화에 산소 이외의 다른 전자수용체가 사용되거나 산소-황화수소 경계면 주변에서 황 침전의 가능성을 시사하고 있었다. 추정된 총 황산염 환원 플럭스는 0.029$\mu$mol $cm^{-2}$$hr^{-1}$로서 총산소소모플럭스의 60% 이상을 차지하고 있어 무산소 환경에서 유기물 분해가 산화환경에서보다 큰 역할을 하는 것으로 나타났다.
We measured the vertical profiles of $O_2$, H$_2$S, and pH in sediment pore water beneath marine cage fish farms using a microsensor with a 25 ${\mu}{\textrm}{m}$ sensor tip size. The sediments are characterized by high organic material load. The oxygen consumption, ...
We measured the vertical profiles of $O_2$, H$_2$S, and pH in sediment pore water beneath marine cage fish farms using a microsensor with a 25 ${\mu}{\textrm}{m}$ sensor tip size. The sediments are characterized by high organic material load. The oxygen consumption, hydrogen sulfide oxidation, and sulfate reduction rates in the microzonations (derived from the vertical distribution of chemical species concentration) were estimated by adapting a simple one-dimensional diffusion-reaction model. The oxygen penetration depth was 0.75 mm. The oxic microzonations were divided into upper and lower layers. Due to hydrogen sulfide oxidation within the oxic zone, the oxygen consumption rate was higher in the lower layer. The total oxygen consumption rate integrated with reaction zone depth was estimated to be 0.092 $\mu$mol $O_2$cm$^{-2}$ hr$^{-1}$ . The total hydrogen sulfide oxidation rate occurring within 0.7 mm thickness was estimated to be 0.030 $\mu$mo1 H$_2$S cm$^{-2}$ hr$^{-1}$ , and its turnover time in the oxic sediment layer was estimated to be about 2 minutes. This suggests that hydrogen sulfide was oxidized by both chemical and microbial processes in this zone. The molar consumption ratio, calculated to be 0.84, indicates that either other electron accepters exit on hydrogen sulfide oxidation, or elemental sulfur precipitation occurs near the $O_2$- H$_2$S interface. Total sulfate reduction flux was estimated to be 0.029 $\mu$mol cm$^{-2}$ hr$^{-1}$ , which accounted for more than 60% of total $O_2$ consumption flux. This result implied that the degradation of organic matter in the anoxic layer was larger than in the oxic layer.
We measured the vertical profiles of $O_2$, H$_2$S, and pH in sediment pore water beneath marine cage fish farms using a microsensor with a 25 ${\mu}{\textrm}{m}$ sensor tip size. The sediments are characterized by high organic material load. The oxygen consumption, hydrogen sulfide oxidation, and sulfate reduction rates in the microzonations (derived from the vertical distribution of chemical species concentration) were estimated by adapting a simple one-dimensional diffusion-reaction model. The oxygen penetration depth was 0.75 mm. The oxic microzonations were divided into upper and lower layers. Due to hydrogen sulfide oxidation within the oxic zone, the oxygen consumption rate was higher in the lower layer. The total oxygen consumption rate integrated with reaction zone depth was estimated to be 0.092 $\mu$mol $O_2$cm$^{-2}$ hr$^{-1}$ . The total hydrogen sulfide oxidation rate occurring within 0.7 mm thickness was estimated to be 0.030 $\mu$mo1 H$_2$S cm$^{-2}$ hr$^{-1}$ , and its turnover time in the oxic sediment layer was estimated to be about 2 minutes. This suggests that hydrogen sulfide was oxidized by both chemical and microbial processes in this zone. The molar consumption ratio, calculated to be 0.84, indicates that either other electron accepters exit on hydrogen sulfide oxidation, or elemental sulfur precipitation occurs near the $O_2$- H$_2$S interface. Total sulfate reduction flux was estimated to be 0.029 $\mu$mol cm$^{-2}$ hr$^{-1}$ , which accounted for more than 60% of total $O_2$ consumption flux. This result implied that the degradation of organic matter in the anoxic layer was larger than in the oxic layer.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.