최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.13 no.5, 2004년, pp.455 - 460
이영범 (국민대학교 신소재공학부) , 송형락 (국민대학교 신소재공학) , 남원종 (국민대학교 신소재공학부)
The deformation and annealing behaviors of a 1050 Al alloy deformed at cryogenic temperature were investigated, focusing on the evolution of microstructures and mechanical properties. Especially, the effects of annealing temperature,
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kim, Young Kuk, Kim, Sang Min, Lee, Ki Seung, Pak, Jong Jin, Shin, Dong Hyuk. Effect of repetitive equal channel angular pressing on microstructural stability of low carbon steel. Metals and materials international, vol.7, no.5, 437-442.
Chang, Si-Young, Lee, Jung Guk, Park, Kyung-Tae, Shin, Dong Hyuk. Microstructures and Mechanical Properties of Equal Channel Angular Pressed 5083 Al Alloy. Materials transactions, vol.42, no.6, 1074-1080.
Patlan, V, Higashi, K, Kitagawa, K, Vinogradov, A, Kawazoe, M. Cyclic response of fine grain 5056 Al–Mg alloy processed by equal-channel angular pressing. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.319, 587-591.
Muñoz-Morris, M.A, Garcia Oca, C, Morris, D.G. Mechanical behaviour of dilute Al–Mg alloy processed by equal channel angular pressing. Scripta materialia, vol.48, no.3, 213-218.
Tsuji, N, Ito, Y, Saito, Y, Minamino, Y. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing. Scripta materialia, vol.47, no.12, 893-899.
Saito, Y., Utsunomiya, H., Tsuji, N., Sakai, T.. Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process. Acta materialia, vol.47, no.2, 579-583.
Zhilyaev, A.P, Nurislamova, G.V, Kim, B.-K, Baró, M.D, Szpunar, J.A, Langdon, T.G. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion. Acta materialia, vol.51, no.3, 753-765.
Wang, Yinmin, Chen, Mingwei, Zhou, Fenghua, Ma, En. High tensile ductility in a nanostructured metal. Nature, vol.419, no.6910, 912-915.
Wang, Y. M., Ma, E., Chen, M. W.. Enhanced tensile ductility and toughness in nanostructured Cu. Applied physics letters, vol.80, no.13, 2395-2397.
Varma, S. K., Caballero, V., Ponce, J., De La Cruz, A., Salas, D.. The effect of stacking fault energy on the microstructural development during room temperature wire drawing in Cu, Al and their dilute alloys. Journal of materials science, vol.31, no.21, 5623-5630.
Lee, J.-C., Seok, H.-K., Suh, J.-Y.. Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing. Acta materialia, vol.50, no.16, 4005-4019.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.