최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.21 no.8 = no.161, 2004년, pp.43 - 49
박정남 (이화다이아몬드) , 고성림 (건국대학교 기계설계학과)
The objective of this research is to investigate the effect of clearance angle on cutting performance in high speed end milling operation. The tool geometry parameters have complex relationship with cutting process parameter. In order to explain the effect of clearance angle, 2D turning operation in...
Kador, S., Trendler, P. H. H., Hodgen, T., 'Investigation Into the Clearance Geometry of End Mills,' Annals CIRP, Vol. 33/1, pp. 33, 1984
Kador, S., Trendler, P. H. H., Hodgen, T. 'Investigation and optimization of the Clearance Geometry of End MiIls,' Annals CIRP, Vol. 34, pp. 149, 1985
Kador, S., 'A Common Denominator for Optimum Cutting Tool Geometry,' Annals CIRP, Vol. 35, No. 1, pp. 41, 1986
Melkote, S. N., Thangaraj, A. R., 'An Enhanced End Milling Surface Texture Model Including the Effects of Radial Rake and Primary Relief Angles,' Transaction of the ASME, Vol. 116, May 1994
Kobayasi, S., Thomsen, E. G., 'The Role of Friction in Metal Cutting,' Transaction of the ASME, pp. 324-332, 1960
Baradie, IM. A. El., 'The effect of varying the workpiece diameter on the cutting tool clearance angle in tool life testing,' Wear, 195, pp. 210-105, 1996
Ko, Sung-Lim, Lee, Sang-Kyu, Bae, Seung-min, 'Study on the Design of End Mill Geometry,' Journal of Korean Society of Precision Engineering, Vol.18, No.8, pp. 24-31, 2001
Kang, M. C., Kim, J. S., Lee, D. W., Kim, K. H., Ha, D. G., 'Machinability Evaluation according to Variation of Endmill Shape for High Speed Machining,' Journal of Korean Society of Precision Engineering, Vol.19, No.5, pp. 133-138
※ AI-Helper는 부적절한 답변을 할 수 있습니다.