최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.21 no.11 = no.164, 2004년, pp.99 - 109
권기환 (한양대 대학원 정밀기계공학과) , 박재준 (한양대 대학원 정밀기계공학과) , 이일규 (한양대 대학원 정밀기계공학과) , 조남규 (한양대 기계공학과) , 양현익 (한양대 기계·정보·경영공학부)
This paper proposes precision evaluation method for the positioning error of three-DOF translational parallel mechanism. The proposed method uses conventional CMM as metrology equipment to measure the position of end-effector. In order to obtain accurate measurement data from CMM, the transform rela...
Nakamura, O., Goto, M., 'Laser interferometric calibration of microscan mechanisms by using three laser beams,' Precision Engineering, Vol.15, No. 1, pp.39-43, 1993
Spiess, Vincze M. and Avromlou, M., 'On the calibration of a 6-D laser tracking system for dynamic robot measurements,' IEEE Transactions on Instrumentation and Measurement, Vol. 47, No. 1, pp. 270-274, 1998
Masory, O. and Jiahua, Y., 'Measurement of pose repeatability of Stewart platform, 'J. of Robot. Syst., Vol. 12, No. 12, pp. 821-832, 1995
Sato, O., Hiraki, M. and Takamusu, K., 'The Calibration of Parallel-CMM: Parallel-Coordinate Measuring Machine,' Proc. of the 3rd euspen International Conference, pp. 573-576, 2002
Han, H.S. and Park, T.W., 'Robust Design of Mechanisms Using the Response Surface Analysis,' KSPE, Vol.13, No.12, pp.56-61, 1996
Joao, B., de Aquino, S. and Burdekin, M. 'A modular space frame for assessing the performance of co-ordinate measuring machines (CMMs),' Precision Engineering, Vol.26, No. 1, pp. 37-48, 2002
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.