최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.13 no.8, 2004년, pp.671 - 677
이동활 (부산대학교 정밀기계공학과) , 정우창 (부산대학교 고장분석 및 신뢰성연구센터) , 문영훈 (부산대학교 정밀기계공학과)
For the large reduction in tube cross section, the tube drawing process is usually performed by two successive passes, so called first drawing and second drawing. In multi-pass drawing process, the reduction balance is important to prevent drawing cracks. Therefore in this study, the model for unifo...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
P. Karnezis and D.C.J. Farrugia, 1998 'Study of cold tube drawing by finite-element modeling', Journal of Material Processing Technology, 80-81, pp. 690-694
N. Alexandrova, 2001, 'Analytical treatment of tube drawing with a mandrel', Proceeding International Mechanical Engineering Part C, Journal of Mechanical Engineering Science, Vol. 215, pp. 581 -589
Chin-Tarn Kwan, 2002, 'A generalized velocity field for axisymmetric tube drawing through an arbitrarily curved die with an arbitrarily curved plug', Journal of Material Processing Technology, 122, pp.213-219
J. Peter Blau, 2001, 'The significance and use of the friction coefficient', Tribology International, Vol. 34, pp. 585-591
I. F. Collins and B. K. Williams, 1985, 'Slipline fields for axisymmetric tube drawing', International Journal of Mechanical Sciences, Vol. 27, pp. 225 -233
G. Rai and S. K. Mukherjee, 1982, 'Cracking of weldments in pipe manufactured by ERW process: An analysis', Engineering Fracture Mechanics, Vol. 16, pp. 527-537
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.