폴리아미드역삼투막을 이용하여 염색폐수를 처리하였다. 염색폐수를 멤브레인 공정에 적용하기 전에 알럼, 페릭 클로라이드, HOC-100와 같은 화학응집제를 이용하여 먼저 처리하였다. 이러한 전처리가 분리막에 의한 폐수처리 공정에 어떠한 영향을 주는지 알아보기 위하여 최적의 응집/침전 조건을 찾았다. 사용된 모든 응집제에 있어서, 전처리된 폐수의 COD와 UV-흡수도는 약 70% 정도의 감소를 보였다. 이렇게 전처리된 폐수를 다시 분리막 공정으로 처리하였다. 전처리 시 사용된 응집제들이 분리막 공정에서 어떻게 분리막 오염에 영향을 주는지를 조사하였으며, 그 결과 HOC-100가 폐수 내에 존재하는, 분리막 오염을 유발하는 물질 제거에 가장 좋은 효과를 나타내는 것을 알 수 있었다.
폴리아미드 역삼투막을 이용하여 염색폐수를 처리하였다. 염색폐수를 멤브레인 공정에 적용하기 전에 알럼, 페릭 클로라이드, HOC-100와 같은 화학응집제를 이용하여 먼저 처리하였다. 이러한 전처리가 분리막에 의한 폐수처리 공정에 어떠한 영향을 주는지 알아보기 위하여 최적의 응집/침전 조건을 찾았다. 사용된 모든 응집제에 있어서, 전처리된 폐수의 COD와 UV-흡수도는 약 70% 정도의 감소를 보였다. 이렇게 전처리된 폐수를 다시 분리막 공정으로 처리하였다. 전처리 시 사용된 응집제들이 분리막 공정에서 어떻게 분리막 오염에 영향을 주는지를 조사하였으며, 그 결과 HOC-100가 폐수 내에 존재하는, 분리막 오염을 유발하는 물질 제거에 가장 좋은 효과를 나타내는 것을 알 수 있었다.
Treatment of a dyeing wastewater was carried out using polyamide RO-membranes. Before applying the wastewater to the membrane process, it was pretreated with various chemical coagulants such as alum, ferric chloride and HOC-100A. In order to see the effect of the pretreatment on the membrane separat...
Treatment of a dyeing wastewater was carried out using polyamide RO-membranes. Before applying the wastewater to the membrane process, it was pretreated with various chemical coagulants such as alum, ferric chloride and HOC-100A. In order to see the effect of the pretreatment on the membrane separation process, the optimum conditions for the coagulation and sedimentation process were sought. As a result, by the pretreatment, for all the coagulants used, the chemical oxygen demand (COD) and UV-absorbance of the wastewater were lowered by more than 70%. The pretreated wastewater was then applied to the membrane process. The effect of the coagulants used for the pretreatment on the membrane fouling was studied. From this study, it was found that the HOC-100A was the best out of the coagulants used for the removal of the materials that could cause membrane fouling.
Treatment of a dyeing wastewater was carried out using polyamide RO-membranes. Before applying the wastewater to the membrane process, it was pretreated with various chemical coagulants such as alum, ferric chloride and HOC-100A. In order to see the effect of the pretreatment on the membrane separation process, the optimum conditions for the coagulation and sedimentation process were sought. As a result, by the pretreatment, for all the coagulants used, the chemical oxygen demand (COD) and UV-absorbance of the wastewater were lowered by more than 70%. The pretreated wastewater was then applied to the membrane process. The effect of the coagulants used for the pretreatment on the membrane fouling was studied. From this study, it was found that the HOC-100A was the best out of the coagulants used for the removal of the materials that could cause membrane fouling.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
In this study, a coagulation and precipitation process using chemical coagulants, one of the easy and efficient ways to remove the excess amount of materials from the wastewater, was used to pretreat the wastewater. Three different coagulants were used: HOC-100A, alum and ferric chloride.
대상 데이터
Three different coagulants were used: HOC-100A, alum and ferric chloride. The wastewater used was a synthetic one composed of dye (Direct Red 75), poly(vinyl alcohol) (PVA), NaCl, and NazSO4, whose compositions were as shown in Table 1. The reason for selecting those materials for the formation of the synthetic wastewater was that they were the major components of the practical dyeing wastewater.
이론/모형
8 LPM (L/min). Flux and rejection were determined by a con ventional method. Flux was determined from the weight of the permeate gathered for a certain period of time and rejection was calculated by the following equation:
성능/효과
As expected, by the pretreatment, the UV absorbance indicating the content of the colorant in the water and COD appeared to be drastically decreased by more than 90%, but conductivity and TDS became even higher. Based on these data, it can be concluded that the 4, 000 ppm alum combined with 2, 000 ppm of color removal agent and anionic polymer was the best condition for the treatment.
참고문헌 (9)
V. K. Gupta, D. Mohan, S. Sharma, and M. Sharma, Removal of basic dyes (Rhodamine B and Methylene blue) from aqueous solutions using bagasse fly ash, Sep. Sci. Technol., 35, 2097-2113 (2000)
U. Pagga and K. Taeger, Development of a method for adsorption of dyestuff on activated sludge, Water Research, 25, 1051-1057 (1994)
P. C. Vandevivere, R. Bianchi, and W. Verstraete, Treatment and reuse of wastewater from the textile wet-processing industry: review of emerging technologies, Journal of Chemical Technology and Biotechnology 72(4), 289-302 (1998)
A. Rozzi, F. Malpei, L. Bonomo, and R. Bianchi, Textile wastewater reuse in northern Italy (Como), Water Science and Technology, 39(5), 121-128 (1999)
J. N. Wu, M. A. Eiteman, and S. E. Law, Evaluation of membrane filtration and ozonation processes for treatment of reactive dye wastewater, Journal of Environmental Engineering ASC, 124(3), 272-277 (1998)
M. Marcucci, G. Nosenzo, G. Capannelli, I. Ciabatti, D. Corrieri, and G. Ciardelli, Treatment and reuse of effluents based on new ultrafiltration and other membrane technologies, Desalination, 138, 75-82 (1970)
K. Treffry-Goatley, C. Buckley, and G. Groves, Reverse osmosis treatment and reuse of textile dyehouse effluents, Desalination, 47, 313-320 (1983)
E. M. Vrijenhoek, S. K. Hong, and M. Elimelech, Influence of membrane surface properties on initial rate of colloidal fouling of reverse osmosis anf nanofiltration membranes, Journal of Membrane Science, 188( 1), 115-128 (2001)
M. Manttari, L. Puro, J. Nuortila-Jokinen, and M. Nystrom, Fouling effects of polysaccharides and humic acid in nanofiltration, Journal of Membrane Science, 165(1), 1-17 (2000)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.