$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

분무연소합성(SCS)법에 의한 나노크기 산화아연(ZnO) 콜로이드의 제조
Fabrication of Nano-sized ZnO Colloids from Spray Combustion Synthesis (SCS) 원문보기

한국세라믹학회지 = Journal of the Korean Ceramic Society, v.41 no.1 = no.260, 2004년, pp.76 - 80  

이상진 (경남대학교 신소재공학부) ,  이상원 (경남대학교 신소재공학부) ,  전병세 (경남대학교 신소재공학부)

초록
AI-Helper 아이콘AI-Helper

분무연소합성법을 이용하여 나노 크기의 산화아연(ZnO) 콜로이드를 제조하였다. 연소반응을 위한 산화제로서 $Zn(NO_3)_2{\cdot}6H_2O$환원제(연료)로서 $CH_6N_4O$를 사용하였다. DTA/TGA를 이용하여 열분석을 행한 결과 $230^{\circ}C$에서 전구체 혼합물의 착화(ignition)에 의한 연소반응으로 생각되는 발열피크가 나타났다. 그러나 분무 연소 반응의 경우 ${\mu}m$ 크기의 액적들로 인해 착화를위한 분자 또는 기들의 함량이 상대적으로 적기 때문에 분무된 액적들의 착화를 위해 연소반응기의 온도를 $500^{\circ}C$로 유지하였다. 응집체의 형성을 억제하기 위하여 여과매체를 사용하여 액적의 개수 농도를 감소시켰으며, 에어로졸 입자의 체류시간을 2.5초로 조절하여 열 유체의 흐름을 층류로 유도하였다. 제조된 입자들의 모양은 모두 구형이었으며, 평균 입자 크기는 180nm이었다. XRD와 TEM 분석 결과 각각의 콜로이드들은 ZnO 고유의 결정성을 나타내고 있었으며, hexagonal 구조를 가지는 것으로 확인되었다.

Abstract AI-Helper 아이콘AI-Helper

Nano-sized ZnO colloids were prepared by use of spray combustion method. for combustion reaction, $Zn(NO_3)_2{\cdot}6H_2O$ and $CH_6N_4O$ were employed as an oxidizer and a fuel. Exothermic peak was shown at $230^{\circ}C$ by DTA/TGA, and it was considered as a com...

주제어

참고문헌 (14)

  1. T. Liu, O. Sakurai, N. Mizutani, and M. Kato, 'Preparation of Sphehcal Fine ZnO Particles by the Spray Pyrolysis Method Using Ultrasonic Atomization Techniques,' J. Mater. Sci., 21 3698-702 (1986) 

  2. D. S. King and R. M. Nix, 'Thermal Stability and Reproducibility of ZnO and Cu/ZnO Catalyst,' J. Cal., 160 76-83 (1996) 

  3. B. Pal and M. Sharun, 'Enhanced Photocatalytic Activity of Highly Porous ZnO Thin Films Prepared by Sol-gel Process,' Mater. Sci. and Phy., 76 82-7 (2002) 

  4. L. Wang and M. Munhammed, 'Synthesis of Zinc Oxide Nanoparticles with Controlled Morphology,' J. Mater. Chem., 9 2871-78 (1999) 

  5. L. Jing, Z. Xu, J. Shang, X. Sun, W. Cai, and H. Guo, 'The Preparation and Characterization of ZnO Ultrafine Particles,' Mater. Sci. and Eng., A332 356-31 (2002) 

  6. J.-H. Han and D.-Y. Kim, 'Microstructure and Electhcal Characteristics of the ZnO-Varister,' Bull. of the Korean Inst. of Met. & Mater., 5 [2] 164-72 (1992) 

  7. T. T. Kodas and M. J. Hampden-Smith, Aerosol Processing of Materials; pp. 380-491, Wiley-VCH, 1999 

  8. K. Kourtakis, M. Robbins, G. W. Kammlott, V. G. Lambrecht, and P. K. Gallagher, 'In Situ Reaction via Self-propagating Chemical Decomposition,' pp. 209-216 in Ceramic Transaction, Vol. 12. Ed. by G. L. Messing, S. Hirano and H. Hausner, The Am. Ceram. Soc. Inc.. Wasterville. OH. 1990 

  9. V. R. Venkatachari. D. Huang. S. P. Ostrander. W. A. Schulzc. and G. C. Stangle. 'A Combustion Synthesis Process for Synthesizing Nano Crystalline Zirconia Powders.' J. Mutei: Res., 10 [3] 748-55 (1995) 

  10. I. A. Aksay, C. Han, G. D. Maupin, C. B. Martin, R. P. Kurosky, and G. C. Stangle, 'Ceramic Precursor Mixture and Technique for Converting the Same to Ceramic,' U. S. Patent, No. 5,061,682, 1991 

  11. G. D. Maupin, L. A. Chick, and R. P. Kurosky, 'Combustion Synthesis Continuous Flow Reactor,' U. S. Patent, No. 5,705,132, 1998 

  12. S. J. Lee, J. D. Yun, H. B. Kwon, B. S. Jun, and G. L. Messing, 'Calculations of Equilibrium Species and Solution Combustion Process for Spray Combustion Synthesis (SCS),' J. Kor. Ceram. Soc., 38 [6] 545-50 (2001) 

  13. S. J. Lee, J. Yun, H. B. Kwon, and B. S. Jun, 'Preparations of Nano-scale Mullite Powder from Solution Combustion Synthesis,' J. Kor. Mater. Res., 11 [9] 797-801 (2001) 

  14. S. J. Lee, J. Yun, H. B. Kwon, and B. S. Jun, 'Preparations of PZT Ceramics by Solution Combustion Synthesis,' J. Kor. Ceram. Soc., 39 [1] 74-8 (2002) 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD(Hybrid)

저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로