최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산유체공학회지 = Journal of computational fluids engineering, v.9 no.1 = no.24, 2004년, pp.10 - 17
김재원 (선문대학교 기계공학부) , 박진원 (선문대학교 대학원 기계공학부)
Comprehensive investigation according to the two kinds of blades is systematically carried out for a design of the centrifugal blower. The motivation of this work is due to demand of enhanced flow rate with higher inlet pressure, such as air purifiers adopting several filters. It is observed that fl...
Wright, T.G., Fluid Machinery, CRC press, New York (1999), p.61
Eck, B., Fans, Pergamon press (1976), p.107
Cau, G., Mandas, N., Manfhda., G., and Nurzia, F., 'Measurement of Phmary and Secondary Flows in an Industrial Forward-Curved Centhfugal Fan, /.Ftuids Engineering, Vo1.109, (1987), p.353
Mohnushi, K., 'The Influence of Geometric Parameters on F.C Centrifugal Fan Noise,' Trans. ASME, JournaI of Vibration, Acoustics, Stress, and Reliability in Design, Vo1.109, (1987), p.227
Morinushi, K, 'Noise Source of a Multiblade Fan,' JSME, Vo1.57, (1991),p.3834
Raj, D., and Swim, W.B., 'Measurements of the Mean Flow Velocity and Velocity Fluctuation at the Exit of a FC Centrifugal Fan Rotor,' Journal of Engineering for Power, Vol.lOS, (1981), p.393
Konieczny, J.P., and Bolton, S., 'Design of Low-noise Centrifugal Blowers - Part2 : Optimization Study', Noise Controt Engineering J., 43, (1995), p.117
ASHRAE Standard, 'Laboratory Methodsof Testing Fans for Rating,' Amehcan Society of Heating, Refrigerating and Air-Conditioning Engineers (1985)
Korea Standard Association, 'Testing Methods of Industrial Fans,' (KS B 6311),(1992), p. 1
CD-adapco Korea, STAR-CD User Guide Manuat, CD-adapco (1998)
Fukano, T., Kodama, H., and Takamatsu, Y. 'Noise generated by low pressure axial flow fans, I : Modelling of turbulent noise,' Journal of Sound and Vibration, Vol. 50, (1997), pp. 63
Jeon, Wan-Ho, 'Analysis of the generation and radiation of the fan noiseby using commercial CFD code,' Journal of FIuid Machinery, Vol. 5, (2002), pp. 13
Harada, S., FIuid Machinery, Asakura publishing company, Tokyo, (1986), p.188
※ AI-Helper는 부적절한 답변을 할 수 있습니다.