최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산유체공학회지 = Journal of computational fluids engineering, v.9 no.4 = no.27, 2004년, pp.13 - 19
Flow distribution of a mid-size vehicle in engine room was investigated numerically to analyze the flow performance of given design cases in a front body of the mid-size vehicle. The data analyzed are the mass flow rate at the upper and lower openings, in the radiator, and the degree of non-uniformi...
Williams, J., 'An automotive Front-End Design Approach for Improved Aerodynamics and Cooling', SAE paper 850281, USA, (1985)
Garrone, A. and Masoero, M., 'Car Underside Upperbody and Engine Cooling System Interactions and Their Contributions to Aerodynamics Drag', SAE Paper 860212, USA, (1986)
China, H. and Kameyama, J., 'A Two Dimensional Computational Procedure forPrediction of Engine Cooling Air Flow', JSAE Review, Vol 9, No 2, (1988), p.94-95
유정열, '엔진룸내 2차원 열유동연구', 자동차공학회지, (1992)
Williams, J.E., Oler, J., Hackett, J. and Hammer, L., 'Automotive Underhood AirflowPatterns', Automotive Technology International' 92, (1992)p.401-444
Williams, J.E. and Hackett, J.E., 'Water flow Simulation of Automotive Underhood Air flow Phenomena', SAE paper 910307, USA, (1991)
Cogotti, A and Berneburg, H. 'Engine Compartment Airflow Investigations Using a Laser-Doppler-Velocimeter', SAE paper 910308, USA, (1991), p.33-41
Ono, K., 'Prediction of the Airflow Rate Through Automotive Radiators Using 3-Dimensional Analysis', JSAE 912223, Japan, (1991)
류명석, 이은준, '엔진룸내 3차원열유동에관한 수치적 연구' , 한국자동차공학회 추계학술대회, (1994) p.229-234
Hajiloo, A and Williams, J. 'Limited Mesh Refinement Study of the Aerodynamic FlowField Around a Car-Like Shape: Computational Versus Experimental Fluid Dynamics', SAE paper 960677, USA, (1996)
Van Doormal, J. P. and Raithby, G. D. 'Enhancement of the SIMPLE Method forPredicting Incompossible Fluid Flows, Numerical Heat Transfer, Vol 7, (1984), p.147-163
Aoki, A, Hanaoka, Y. and Hara, M. 'Numerical Simulation of Three Dimensional Engine Compartment Airflow in FWD', SAE paper 900086, USA, (1990)
Han, T. and Skynar, M. 'Three-Dimensional Navier-Stokes Analysis of Front End Air Flow for a Simplified Engine Compartment', SAE paper 921091, USA, (1992)
Chiou, J.P. 'The Effect of the Flow Nonuniformity on the Sizing of the Engine Radiator', SAE paper 800219, USA, (1980)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.