최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국방재학회논문집 = Journal of the Korean Society of Hazard Mitigation, v.4 no.4, 2004년, pp.1 - 6
Fatigue tests were carried out for butt welded joints with SM520-TMC steel plate with thickness between 20mm and 80mm. The test results were analysed statistically and the effect of plate thickness on the fatigue strength investigated. The fatigue strengths based on nominal stress range satisfy the ...
김영식 (1990). TMCP 강재의 용접성, 한국강구조학회논문집 제2권 4호, pp. 23-32
김동규 (1991). 건축구조용 TMCP 극후강재의 성능평가에 관한 설험적 연구 (I), (II) 한국강구조학회 논문집 제3권 3호, pp50-58, 제3권 4호 pp. 62-67
용환선, 김석태 (1995). TMCP강의 피로, 한국강구조학회 논문집 제7권 4호, pp. 193-202
용환선, 김석태, 조용식 (1996). HT60급 TMCP강 용접부 피로거동 한국강구조학회 논문집 제8권 4호, pp. 133-142
대한토목학회 (2003). 'TMCP 강의 강교량 적용에 관한 설계기준 개발' 연구보고서
Gurney T. R. (1979). 'The influence of thickness on the fatigue strength of welded joints', Proc. 2nd International Conference on the Behavior of Offshore Structures, BHRA Fluid Engineering, Cranfield, Bedford, England, Vol. 1, Paper 41, pp. 523-534
Gurney, T. R (1981). 'Some comments on fatigue design rules for offshore structures', Proc. 2nd international Symposium on Integrity of offshore Structures, Applied Sience Publishers, Barking, Essex, England, pp. 219-234
AASHTO (2002). LRFD bridge design spec. 2nd edition
Eurocode 3 (2003). prEN1993-1-9, Eurocode 3 Part 1.9 : Fatigue, stage 49 draft, May 2003
피로설계지침 : '강도로교의 피로설계지침' 일본도로협회
※ AI-Helper는 부적절한 답변을 할 수 있습니다.