$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Compatibilization of Immiscible Poly(l-lactide) and Low Density Polyethylene Blends 원문보기

Fibers and polymers, v.5 no.4, 2004년, pp.270 - 274  

Kim Young Fil (Department of Applied Chemical Engineering, Chonnam National University) ,  Choi Chang Nam (Department of Applied Chemical Engineering, Chonnam National University) ,  Kim Young Dae (Department of Applied Chemical Engineering, Chonnam National University) ,  Lee Ki Young (Department of Applied Chemical Engineering, Chonnam National University) ,  Lee Moo Sung (Department of Applied Chemical Engineering, Chonnam National University)

Abstract AI-Helper 아이콘AI-Helper

Blends of poly(l-lactide) (PLA) and low density polyethylene (LDPE) were prepared by melt mixing in order to improve the brittleness of PLA. A reactive compatibilizer with glycidyl methacrylate (GMA), PE-GMA, was required as a compatibilizer due to the immiscibility between PLA and LDPE. It contribu...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • In this study, we prepare polymer blends of PLA and low density polyethylene (LDPE) by melt-mixing and investigate the effect of reactive compatibilizer on their morphology and tensile properties. LDPE has chosen as a counterpart of PLA due to its superior mechanical properties and major use for packaging.

대상 데이터

  • LDPE was LDPE 751 manufactured by Dow Chem. Three olefinic copolymers were chosen as reactive compatibilizers: EAA, PE-GMA8, and PE-GMA25. EAA and PE-GMA have acrylic acid (AA) and glycidyl methacrylate (GMA) as functional groups, respectively.

이론/모형

  • Tensile properties of blends were measured at room temperature using a tensile tester (Shimadzu, Autograph AGS-D) according to ASTM D638M. Specimens with the dimension of 130 mm length, 8 mm width and 1 mm height, respectively, were compression molded at 210 ℃.
본문요약 정보가 도움이 되었나요?

참고문헌 (15)

  1. K. Sudesh, H. Abe, and Y. Doi, Prog. Polym. Sci., 25, 1503 (2000) 

  2. Y. Ikada and H. Tsuji, Macromol. Rapid. Comm., 21, 117 (2000) 

  3. R. E. Drumright, P. R. Gruber, and D. E. Henton, Adv. Mater., 12, 1841 (2000) 

  4. D. R. Paul and C. B. Bucknall (Eds.), 'Polymer Blends' John & Wiley and Sons, New York, 2000 

  5. S. Krause and S. H. Goh in 'Polymer Handbook, 4th Ed.', (J. Brandrup, E. H. Immergut, and E. A. Grulke Eds.), VI/409, John & Wiley and Sons, New York, 1999 

  6. S. Datta and D. J. Lohse, 'Polymeric Compatibilizers', Hanser, Munich, 1996 

  7. U. Sundararaj and C. W. Macosko, Macromolecules, 28, 2647 (1995) 

  8. D. J. Lohse, Polym. Eng. Sci., 26, 1500 (1986) 

  9. Q. T. Pham, R. Petiaud, H. Waton, and M-F. L-Darricades, 'Proton and Carbon NMR Spectra of Polymers', CRC Press, Boca Raton, 1991 

  10. C. T. Maa and F. C. Chang, J. Appl. Polym. Sci., 49, 913 (1993) 

  11. D. Y. Chang and F. C. Chang, Polym. Networks Btends, 4, 157 (1994) 

  12. N. C. Liu and W. E. Baker, Adv. Polym. Technol., 11, 249 (1992) 

  13. D. Godshall, C. White, and G. L. Wilkes, J. Appl. Polym. Sci., 80, 130 (2001) 

  14. A. Margolina and S. Wu, Polymer, 29, 2170 (1988) 

  15. S. Wu, Polym. Eng. Sci., 27, 335 (1987) 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로