최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.14 no.3, 2005년, pp.1 - 7
김봉석 (아주대학교 대학원 기계공학과) , 강태한 (아주대학교 대학원 기계공학과) , 강재훈 (한국기계연구원 지능형정밀기계연구부) , 송준엽 (한국기계연구원 지능형정밀기계연구부) , 이수훈 (아주대학교 기계공학부)
The prediction for tool life is one of the most important factors for increasing reliability, stability, and productivity of manufacturing system. This paper deals with a tool life prediction method in view of reliability assessment for cutting tools. In this study, flank wear was focused among mult...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Maeng, M. J., and Chung, J. K., 1995, 'A Study on the Cutting Resistance and Acoustic Emission Signal due to Increasing Tool Wear in Turning,' J. of KSMTE, Vol. 4, No. 2, pp. 18-24
Cook, N., 1973, 'Tool Wear and Tool Life,' J. of Eng. Ind., Trans. ASME, Vol. 95, pp. 931-938
Park, J. J., 1990, Adaptive Observer and Computer Vision for On-Line Flank Wear Estimation, Ph. D. Dissertation, Univ. of Michigan
Lee, S. H., Kim, B. S., Kang, T. H., Song, J. Y., Kang, J. H., and Seo, C. S., 2004, 'Development of Reliability Prediction Program for Tool life,' Proceedings of the KSMTE Spring Conference 2004, pp. 317-322
Seo, N. S., 2000, Cutting Process, Dong-myung Co
Taylor, F. W., 1907, 'On the Art of Cutting Metals,' Trans. ASME, Vol. 28, pp. 310-350
Choi, W., 1987, 'Study on the Tool Life Constant in Tool Life Equation,' Annual report of the KIT, Vol. 8, pp. 37-40
Tai, C. C., and Fuh, K. H., 1995, 'Model for Cutting Forces Prediction in Ball-end Milling,' Int. J. of Mach. Tools Manufact., Vol. 35, No. 4, pp. 511-534
Song, C. W., 2003, A Study on the Prediction of Machining Temperature and Cutting force in end Milling Process, MS Thesis, Chonbuk National Univ
Lau, W. S., and Rubenstein, C., 1982, 'The Influence of the Plan Approach Angle in Orthogonal Cutting,' Int. J. of MTDR, Vol. 22, No. 1, pp. 65-74
Lau, W. S., and Venuvinod P. K., 1980, 'The Relation between Tool Geometry and the Taylor Tool Life Constant,' Int. J. of MTDR, Vol. 20, No. 1, pp. 29-44
※ AI-Helper는 부적절한 답변을 할 수 있습니다.