참고문헌 (52)

1. Kim, H. J., 'Ballistic Protection Engineering,' Cheong Moon Gak Publishers, 2004 

2. Lee, H. J., 'Rifle and Ballistics,' Cheong Moon Gak Publishers, 1998 

3. Korea Military Academy, 'Weapon engineering,' Cheong Moon Gak Publishers, 1992 

4. Sadanandan, S. and Hetherington, J. G., 'Characterization of Ceramic/Steel Ceramic / Aluminum Armours Subjected Oblique Impact,' International Journal of Impact Engineering, Vol. 19, pp. 811-819,1997 

   상세보기

5. Benloulo, I. S. C. and Sanchezgalvez, V., 'A New Aanlytical Model to Simulate Impact onto Ceramic/Composite Armors,' International Journal of Impact Engineering, Vol. 21, pp. 461-471, 1998 

   상세보기

6. Mahfuz, H., Zhu, Y., Haque, A., Abutalib, A., Vaidya, U., Jeelani, S., Gama, B., Gillespie, J. and Fink, B., 'Investigation of high-velocity impact on integral armor using finite element method,' International Journal of Impact Engineering, Vol. 24, pp. 203-217, 2000 

   상세보기

7. Jovicic, J., 'Modeling of the ballistic behavior of gradient design composite armor,' Composites: Part A, Vol. 31, pp. 773-784, 2000 

   상세보기

8. Mines, R.A.W., 'A one-dimensional stress wave analysis of a lightweight composite armour,' Composite Structures, Vol. 64, pp. 55-62, 2004 

   상세보기

9. Chou, S. C., 'Ballistic impact damage of s2 glass reinforced plastic structural armors,' Composites Science and Technology, Vol. 58, pp. 1453-1461, 1998 

   상세보기

10. Gama, B. A., 'Aluminum foam integral armor: a new dimension in armor design,' Composite Structures, Vol. 52, pp. 381-395,2001 

    상세보기

11. Fawaz, Z., Zheng, W. and Behdinan, K., 'Numerical simulation of normal and oblique ballistic impact on ceramic composite armours,' Composite Structures, Vol. 63, pp. 387-395, 2004 

    상세보기

12. Anderson, C. E. and Walker, J. D., 'An analytical model for dwell and interface defeat,' International Journal of Impact Engineering, Vol. 31, pp. 1119-1132,2005 

    상세보기

13. Shin, H. S., Oh, S. Y., Kim, D. K., Kim, C. W. and Chang, S. N., 'Investigation on Fracture Behavior of Armor Ceramics Against HEAT Penetration,' International Journal of Impact Engineering, Vol. 23, pp. 631-638, 2003 

    상세보기

14. Rosenberg, Z. and Dekel, E., 'On the role of material properties in the. terminal ballistics of long rods,' International Journal of Impact Engineering, Vol. 30, pp. 835-851,2004 

    상세보기

15. Rosset, W. S., 'Patterned armor performance evaluation,' International Journal of Impact Engineering, Vol. 31, pp. 1223-1234,2005 

    상세보기

16. Rosenberg, Z., Dekel, E., Hohler, V., Stilp, A.J. and Wever, K., 'Hypervelocity Penetration of Tungsten Alloy Rods into Ceramic Tiles : Experiments and 2-D Simulations,' International Journal of Impact Engineering, Vol. 20, pp. 675-683, 1997 

    상세보기

17. Grace, F. I. and Rupert, N. L., 'Analysis of Long Rods Impacting Ceramic Targets at High Velocity,' International Journal of Impact Engineering, Vol. 20, pp. 281-292,1997 

    상세보기

18. Sharma, M. M. and Amateau, M. F., 'Processing of laminated hybrid ceramic composites,' Composites Part B, Vol. 29, pp. 189-194, 1998 

    상세보기

19. Lundberg, P., Renstrom, R. and Lundberg, B., 'Impact of metallic projectiles on ceramic targets: transition between interface defeat and penetration,' International Journal of Impact Engineering, Vol. 24, pp. 259-275, 2000 

    상세보기

20. Weber, K., Holmquist, T. J. and Templetion, D. W., 'The Response of Layered Aluminum Nitride Targets Subjected to Hypervelocity Impact,' International Journal of Impact Engineering, Vol. 26, pp. 831-841,2001 

    상세보기

21. Hubert, W., Meyer, J. and Kleponis, D. S., 'Modeling The High Strain Rate Behavior of Titanium Undergoing Ballistic Impact and Penetration,' International Journal of Impact Engineering, Vol. 26, pp. 509-521,2001 

    상세보기

22. Simha, C. H. M., Blessa, S. J. and Bedford, A., 'Computational modeling of the penetration response of a high-purity ceramic,' International Journal of Impact Engineering, Vol. 27, pp. 65-86, 2002 

    상세보기

23. Bao, Y., Su, S., Yang, J. and Fan, Q., 'Prestressed ceramics and improvement of impact resistance,' Materials Letters, Vol. 57, pp. 518-524, 2002 

    상세보기

24. Arias, A., Zaera, R., Puente, J. L. and Navarro, C., 'Numerical modeling of the impact behavior of new particulate-loaded composite materials,' Composite Structures, Vol. 61, pp. 151-159, 2003 

    상세보기

25. Forquin, P., Denoual, C., Cottenot, C. E. and Kild, F., 'Experiments and modelling of the compressive behaviour of two SiC ceramics,' Mechanics of Materials, Vol. 35, pp. 987-1002, 2003 

    상세보기

26. Zhang, G. J., Ando, M., Yang, J. F., Ohji, T. and Kanzaki, S., 'Boron carbide and nitride as reactants for in situ synthesis of boride-containing ceramic composites,' Journal of the European Ceramic Society, Vol. 24, pp. 171-178, 2004 

    상세보기

27. Goncalves, D.P., Melo, F. C. L., Klein, A. N., and Qureshi, H. A., 'Analysis and investigation of ballistic impact on ceramic/metal composite armour,' International Journal of Machine Tools & Manufacture, Vol. 44, pp. 307-316, 2004 

    상세보기

28. Yu. R. C., Ruiz, G. and Pandolfi, A., 'Numerical investigation on the dynamic behavior of advanced ceramics,' Engineering Fracture Mechanics, Vol. 71, pp. 897-911, 2004 

    상세보기

29. Holmquist, T. J. and Johnson, G. R., 'Modeling prestressed ceramic and its effect on ballistic performance,' International Journal of Impact Engineering, Vol. 31, pp. 113-127, 2005 

    상세보기

30. Lundberg, P. and Lundberg, B., 'Transition between interface defeat and penetration for tungsten projectiles and four silicon carbide materials,' International Journal of Impact Engineering, Vol. 31, pp. 781-792, 2005 

    상세보기

31. Wang, B., 'The behaviour of laminated composite plates as armor,' Materials Processing Technology, Vol. 68, pp. 279-287,1997 

    상세보기

32. Nandlall, D., 'Numerical simulation of the ballistic response of GRP plate,' Composites Science and Technology, Vol. 58, pp. 1463-1469, 1998 

    상세보기

33. Huang, X. G., Gillespie, J. W. J., Kumar, V. and Gavin, L., 'Mechanics of integral armor: discontinuous ceramic-cored sandwich structure under tension and shear,' Composite Structures, Vol. 36, pp. 81-90, 1996 

    상세보기

34. Fellows, N.A. and Barton, P.C., 'Development of impact model for ceramic-faced semi-infinite armour,' International Journal of Impact Engineering, Vol. 22, pp. 793-811,1999 

    상세보기

35. Lee, M. and Yoo, Y. H., 'Analysis of ceramic/metal armour systems,' International Journal of Impact Engineering, Vol. 25, pp. 819-829,2001 

    상세보기

36. Lynch, N. J., Bless, S. J., Brissenden, C., Berry, D. and Pedersen, B., 'Novel Penetrator Performance Against a Steel-Ceramic-Steel Target at 0 Over The Velocity Range 1800 to 2900 m/s,' International Journal of Impact Engineering, Vol. 26, pp. 475-486, 2001 

    상세보기

37. Holmquist, T., Templeton, D. W. and Bishnoi, K. D., 'Constitutive modeling of aluminum nitride for large strain, high-strain rate, and high-pressure applications,' International Journal of Impact Engineering, Vol. 25, pp. 211-231, 2001 

    상세보기

38. Hohler, V., Weber, K., Tham, R., James, B., Barker, A. and Pickup, I., 'Comparative Analysis of Oblique Impact on Ceramic Composite Systems,' International Journal of Impact Engineering, Vol. 26, pp. 333-344, 2001 

    상세보기

39. Fritz, L., 'Carbon, polyethylene and PBO hybrid fiber composites fot structural lightweight armor,' Composite: Part A, Vol. 33, pp. 211-231, 2002 

    상세보기

40. Yadav, S. and Ravichandran, G., 'Penetration resistance of laminated ceramic/polymer structures,' International Journal of Impact Engineering, Vol. 28, pp. 557-574, 2003 

    상세보기

41. Chin, E. S.C., 'Army focused research team on functionally graded armor composites,' Materials Science and Engineering A, Vol. 259, pp. 155-161, 1999 

    상세보기

42. Bendor, G., Dubinsky, A., Elperin, T. and Frage, N., 'Optimization of two component ceramic armor for a given impact velocity,' Theoretical and Applied Fracture Mechanics, Vol. 33, pp. 185-190, 2000 

    상세보기

43. Wang, Z. and Nakamura, T., 'Simulations of crack propagation in elastic plastic graded materials,' Mechanics of Materials, Vol. 36, pp. 601-622, 2004 

    상세보기

44. Jin, Z.H. and Dodds, R. H. Jr., 'Crack growth resistance behavior of a functionally graded material: computational studies,' Engineering Fracture Mechanics, Vol. 71, pp. 1651-1672, 2004 

    상세보기

45. Hall, I. W. and Den, M., 'High Strain Rate Behavior of a Sic Particulate Reinforced Alumina Ceramic Matrix Composite,' Scripta Materialia, Vol. 38, No. 4, pp. 667-674, 1998 

    상세보기

46. Sherman, D., 'Impact failure mechanisms in alumina tiles on finite thickness support and the elect of confinement,' International Journal of Impact Engineering, Vol. 24, pp. 313-328, 2000 

    상세보기

47. Mahdi, S., Gamaa, B.A., Yarlagadda, S. and Gillespie, J. W., 'Effect of the manufacturing process on the interfacial properties and structural performance of multi-functional composite structures,' Composites: Part A, Vol. 34, pp. 635-647, 2003 

    상세보기

48. Mahdi, S. and Gillespie, J. W., 'Finite element analysis of tile-reinforced composite structural armor subjected to bending loads,' Composites : Part B, Vol. 35, pp. 57-71, 2004 

    상세보기

49. Pallone, A., Demaree, J. and Adams, J., 'Application of nondestructive ion beam analysis to measure variations in the elemental composition of armor materials,' Nuclear Instruments and Methods in Physics Research: Part B, Vol. 219, pp. 755-758, 2004 

    상세보기

50. Kim, H. J., Yuk, J. I. and Lee, S. G., 'Dynamic Failure Behavior of Ceramic / Fiber-Reinforced Composites under High Speed Impact Loading,' Korean Journal of Materials Research, Vol. 7, No.9, pp. 795-804, 1997 

51. Kim, C., Kim, S. M. and Kang, T. J., 'Energy Absorption Mechanism of Kevlar Multiaxial Warp Knitted Fabric Composite under Impact Loading,' Journal of the Korean Society for Composite Materials, Vol. 11, No.6, 1998 

52. Sohn, S. W. and Hong, S. H., 'Research Trends on the Ballistic Protection Materials and Development of Bullet-proof Helmet,' Journal of the Korean Society of Precision Engineering, Vol. 19, No.7, pp. 7-19, 2002 

저자의 다른 논문 :

안성훈 (67) 정우균 (6) 김희재 (5)