[논문]Characterization and processing of Biodegradable polymer blends of poly(lactic acid) with poly(butylene succinate adipate)

Lee, Sang-Mook; Lee, Jae-Wook

Characterization and processing of Biodegradable polymer blends of poly(lactic acid) with poly(butylene succinate adipate) 원문보기

Korea-Australia rheology journal, v.17 no.2, 2005년, pp.71 - 77

Lee, Sang-Mook (Department of Applied chemistry, Dongduk Women's University) , Lee, Jae-Wook (Applied Rheology Center, Department of Chemical Engineering, Sogang University)

Abstract ▼ AI-Helper

We investigated thermal, rheological, morphological and mechanical properties of a binary blend of poly(lactic acid) (PLA) and poly(butylene succinate adipate) (PBSA). The blends were extruded and their molded properties were examined. DSC thermograms of blends indicated that the thermal properties of PLA did not change noticeably with the amount of PBSA, but thermogravimetric analysis showed that thermal stability of the blends was lower than that of pure PLA and PBSA. Immiscibility was checked with thermal data. The rheological properties of the blends changed remarkably with composition. The tensile strength and modulus of blends decreased with PBSA content. Interestingly, however, the impact strength of PLA/PBSA (80/20) blend was seriously increased higher than the rule of mixture. Morphology of the blends showed a typical sea and island structure of immiscible blend. The effect of the blend composition on the biodegradation was also investigated. In the early stage of the degradation test, the highest rate was observed for the blend containing $80wt\%$ PBSA.

주제어

참고문헌 (19)

Cai, H., V. Dave, R. A. Gross and S. P. McCarthy, 1996, Effects of physical aging, crystallinity, and orientation on the enzymatic degradation of poly (lactic acid), J. Polym. Sci. Part B: Polymer Physics 40, 2701-2708

상세보기
Grijpma, D. W., R. D. A. Van Hofslot, H. Super, A. J. Nijenhuis and A. J. Pennings, 1994, Rubber toughening of poly (lactide) by blending and block copolymerization, Polym. Eng. Sci. 34, 1674-1684

상세보기
Huang, S. J., 1985, Encycl Polym Sci Eng 2: Biodegradable polymers. Wiley-Interscience, New York
Liu, X., M. Dever, N. Fair and R. X. Benson, 1997, J. Environ. Polym. Degrad. 5, 225
Lunt, J., 1998, Large-scale production, properties and commercial applications of polylactic acid polymers, Polym. Degrad. Stab. 59, 145-152

상세보기
Martin O. and L. Averous, 2001, Poly(lactic acid): plasticization and properties of biodegradable multiphase systems, Polymer 42, 6209-6219

상세보기
Mayer, J. M. and D. L. Kaplan, 1994, Trends in Polymer Science 2, 227-235
Miyata, T. and T. Masuko, 1998, Crystallization behaviour of poly(L-lactide), Polymer 39, 5515-5521

상세보기
Nijenhuis, A. J., E. Colstee, D. W. Grijpma and A. J. Pennings, 1996, High molecular weight poly(L-lactide) and poly(ethylene oxide) blends: thermal characterization and physical properties, Polymer 37, 5849-5857

상세보기
Nishioka, M., T. Tuzuki, Y. Wanajyo, H. Oonami and T. Horiuchi, 1994, Japan Stud. Polym. Sci. 12, 584-590
Perego, G., G. D. Cella and C. Bastioli, 1996, Effect of molecular weight and crystallinity on poly(lactic acid) mechanical properties, J. Appl. Polym. Sci. 59, 37-43

상세보기
Roberts, R. C., 1970, The melting behavior of bulk crystallized polymers, J. Polym. Sci. PartB: Polym. Letters 8, 381-384

상세보기
Schwacch, M. Ver and G., J. Coudance, 1995, J. Macromol. Sci. Pure Appl. Chem. A32, 787
Sweet, G. E. and J. P. Bell, 1972, Multiple endotherm melting behavior in relation to polymer morphology, J. Polym. Sci. Part A-2: Polymer Physics 10, 1273-1283

상세보기
Tokiwa, Y. and T. Suzuki, 1981, Hydrolysis of copolyesters containing aromatic and aliphatic ester blocks by lipase, J. Appl. Polym. Sci. 26, 441-448

상세보기
Tsuji, H. and Y. J. Ikada, 1998, Blends of aliphatic polyesters. II. Hydrolysis of solution-cast blends from poly (L-lactide) and poly ( $\epsilon$ -caprolactone) in phosphate-buffered solution, J. Appl. Polym. Sci. 67, 405-415

상세보기
Van Krevelen, D. W., 1990, Properties of Polymers, Elsevier
Wu, S., 1985, Phase structure and adhesion in polymer blends: A criterion for rubber toughening, Polymer 26, 1855-1863

상세보기
Zhang, L., S. H. Goh and S. Y. Lee, 1998, Miscibility and crystallization behaviour of poly(L-lactide)/poly(p-vinylphenol) blends, Polymer 39, 4841-4847

상세보기

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Characterization and processing of Biodegradable polymer blends of poly(lactic acid) with poly(butylene succinate adipate) 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (19)

이 논문을 인용한 문헌

저자의 다른 논문 :

관련 콘텐츠

원문 보기

연관된 기능

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

연합인증

Characterization and processing of Biodegradable polymer blends of poly(lactic acid) with poly(butylene succinate adipate) 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (19)

이 논문을 인용한 문헌

저자의 다른 논문 :

이재욱 (40)

관련 콘텐츠

원문 보기

연관된 기능

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트