최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓溶接學會誌 = Journal of the Korean Welding Society, v.23 no.4, 2005년, pp.17 - 26
문준오 (한양대학교 신소재공학과) , 이창희 (한양대학교 신소재공학과)
HAZ (Heat Affected Zone) which occurs during welding thermal cycle has an important effect on the mechanical properties of the weld metal. So there were many efforts to develop the model which is able to predict the microstructure and mechanical properties in weld HAZ and lots of metallurgical model...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
K. Easterling : Introduction to the physical metallurgy of Welding, Butterworths, (1983), 104
Stephen Liu, Fang Chun Liao : Mat Sci & Eng A244 (1998) 273-283
Sangho UHM, Joonoh MOON, Changheel LEE, Jihyun YOON and Bongsang LEE : ISIJ Int, 44-7(2004), 1230-1237
Y. Li, D, N. Crowther, M. J. W. Green, P. S. Mitchell and T. N. Baker : ISIJ Int, Vol. 41
O. Grong : Metallurgical Modeling of Welding, The Institute of Materials
Sysweld+ User Manual(Ver. 10), Framasoft+CSI. 1996
J. B. Leblond and J. C : Devaux, Acta Metall., 32, 1984
Rosenthal : D., 2eme Congress National des Science, Brussels, (1935), 1277
R. R. Rykalin : Welding in the World, 1012(1974) 227 (10)
P. S. Myers, O. A. Uyehara and G. L. Borman : Welding Research Council Bulletin (1967), 123
V. Pavelic, R. Tanbakuchi. O. A. Uyehara and P. S. Myers : Welding Journal, 48(1969), 295
S. Kou : Metall. Trans. A, 13A(1982), 363
J. A. Goldak, A. Chakravarti and M. J. Bibby Trans. AIME, 15B(1984), 299
J. F. Key, H. B. Smartt, J. W. Chan and M. E. Mcilwain : Proceedings Int. Conf. on 'Welding Technology for Energy Applications', Gatlingburg, TN, 1982
A. Bejan : Heat Transfer, (1966), 211
C. Wagner : Z. Electrochem., 65(1961), 581
J. Agren : Scand. J. Metall., 19(1990), 2
R. E. Reed Hill : 'Physical Metallurgy of Principles (3th Ed.).' Boston, PWS, 1996
W. C. Leslie : 'Physical Metallurgy of Steels(4th ed.),' Elsevier Science, 1982
B. B. Rath and H. hu : Trans. TMS AIME, 245(1969), 1243
B. B. Rath and H. hu : Trans. TMS AIME, 245(1969), 1577
P. A. Manohar, D. P. Dunne, T. Chandra and C. R. Killmore. : ISIJ Int, 36 (1996), 194
C. A. Dube, H. I. Aaronson and R. F. Mehl: Rev. Met., 55(1958), 201
일본 철강협회 : 제 128회 서산 기념 기술 강좌, 접합 기술 최근 진보(1989)
W. T. Reynolds, Jr., M. Enomoto and H. I. Aaronson : Phase Transformations in Ferrous alloys, TMS AIME, Warrendale PA, (1984), 155
J. Barford and W. S. Owen: J. Iron Steel Inst., 197(1961), 146
M. Umemoto, K. Horiuch and I. Tamura: Trans. ISIJ, 22(1982), 855
L. W. Graham and H. J. Axon: J. Iron Steel Inst., 191(1959), 361
A. D. Davenport: Trans. AIME, 145(1941), 301
R. M. Dey: Trans. Ind. Inst. of Metals, 39(1986), 169
A. Matsuzaki and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 15(1999), 519
F. V. Goler and G. Sach: Zeit. F. Phys., 77(1932), 281
W. A. Johnson and R. F. Mehl: Trans. AIME, 125(1939), 416
M. Avrami: J. Chem. Phy., 7(1939), 1103
J. W. Cahn: Acta Metall., 4(1956), 449
M. Umemoto: Control and Prediction of Structure and Property, ISIJ, Tokyo, Japan, (1988), 105
K. Lorenz and C. Duren: Conf. on Steels for Pipe and Pipeline Fittings, London, Oct. 21-23(1981)
K. Satoh and T. Terasaki: General Assembly of JWS, 25(1979), 98
K. Lorenz and C. Duren: IIW Doc. IX-B-II-82, (1982)
M. Beckert and R. Holz: Schweisstechnik, 23(1973), 344
W. C. Leshie: The Physical Metallurgy of Steels, Mcgraw Hill, New York, (1982)
N. Yurioka, M. Okumura, T. Kasuya and H. J. U. Cotton: Metal Const., 19(1987), 44. 217R
P. Maynier, J. Dollet and B. Jungmann: Proc. Of AIME Symposium, Oct. 24 26, (1977), 518
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.