최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.17 no.10, 2005년, pp.930 - 937
김용한 (고려대학교 기계공학과 대학원) , 이호성 (고려대학교 기계공학과 대학원) , 김용찬 (고려대학교 기계공학과)
The objective of this study is to investigate the heat transfer performance of flat plate finned-tube heat exchangers with large fin pitch. In this study, twenty-two heat exchangers were tested with a variation of fin pitch, number of tube row, and tube alignment. The heat transfer coefficient decre...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Wang, C. C. and Chi, K. Y., 2000, Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, Part I: New experimental data, Int. J. Heat Mass Transfer, Vol. 43, pp.2681-2691
Rich, D. G., 1973, The effect of fin spacing on the heat transfer and friction performance of multi-row, smooth plate fin-and-tube heat exchangers, ASHRAE Transactions, Vol. 79, pp. 137-145
Rich, D. G., 1975, The effect of the number of tube rows on heat transfer performance of smooth plate fin-and-tube heat exchangers, ASHRAE Transactions, Vol. 81, pp.307-317
Saboya, F. E. M. and Sparrow, E. M., 1976, Transfer characteristics of two-row plate fin and tube heat exchanger configurations, Int. J. Heat Mass Transfer, Vol. 19, pp. 41-49
Kim, J. Y. and Song, T. H., 2003, Effect of tube alignment on the heat/mass transfer from a plate fin and two-tube assembly: naphthalene sublimation results, Int. J. Heat Mass Transfer, Vol. 46, pp. 3051-3059
Ay, H., Jang, J. Y. and Yeh, J. N., 2002, Local heat transfer measurements of plate finned-tube heat exchangers by infrared thermography, Int. J. Heat Mass Transfer, Vol. 45, pp. 4069-4078
Critoph, R. E., Holland, M. K. and Fisher, M., 1999, Comparison of steady state and transient methods for measurement of local heat transfer in plate fin-tube heat exchangers using liquid crystal thermography with radiant heating, Int. J. Heat Mass Transfer, Vol. 42, pp.1-12
Mon, M. S. and Gross, U., 2004, Numerical study of fin-spacing effects in annular-finned tube heat exchangers, Int. J. Heat Mass Transfer, Vol. 47, pp.1953-1964
Romero-Mendez, R., Sen, M., Yang, K. T. and MaClain, R., 2000, Effect of fin spacing on convection in a plate fin and tube heat exchanger, Int. J. Heat Mass Transfer, Vol. 43, pp. 39-51
Jang, J. Y. and Wu, M. C., 1996, Numerical and experimental studies of three-dimensional plate-fin and tube heat exchangers, Int. J. Heat Mass Transfer, Vol. 39, pp. 3057-3066
Wang, C. C. and Chi, K. Y., 2000, Heat transfer and friction characteristics of palin fin-and-tube heat exchangers, Part II: Correlation, Int. J. Heat Mass Transfer, Vol. 43, pp.2693-2700
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.