최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국자동차공학회논문집 = Transactions of the Korean Society of Automotive Engineers, v.13 no.6, 2005년, pp.128 - 134
김기주 (쌍용자동차 CAE팀) , 신광선 (서울대학교 재료공학부) , 정효태 (강릉대학교 금속재료공학과) , 백영남 (경희대학교 기계산업시스템공학부)
In order to fabricate the aluminum alloys with good drawability, the textures evolution of the AA5182 sheets after rolling and annealing was studied. The measurement of the deformation textures was carried out for the sheets which were cold rolled with high reduction ratio by using the symmetric rol...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
D. N. Lee and K. H. Oh, 'Calculation of Plastic Strain Ratio from the Texture of Cubic Metal Sheet,' J. of Mater. Sci., Vol.20, pp.3111-3118,1985
P. Lequeu and J. J. Jonas, 'Modeling of the Plastic Anisotropy of Textured Sheet,' Metall. Trans., Vol.19A, pp.105-120, 1988
W. B. Hutchinson, 'Recrystallization Textures in Iron Resulting from Nucleation at Grain Boundaries,' Acta Mater., Vol.37, No.4, pp. 1047-1056,1989
T. Kamijo, H. Adachihara and H. Fukutomi, 'Formation fo a (001)[100] Deformation Structure in Aluminum Single Crystals of an S-Orientation,' Acta Mater., VoI.41, No.3, pp.975-985,1993
J. Hu, K. Ikeda and T. Mural'ami, 'Effect of Single Roller Driving Cold-Rolling on Texture and Formability of Pure Aluminum Sheet,' J. Japan Inst. Metals, Vol.60, No.11, pp.1130-1135,1996
K. Hasegawa, T. Fujita, K. Araki, S. Mitao, K. Osawa, M. Niikura and K. Ohori, 'Effect of Intermediate Annealing on the R-Value of AI-Mg Alloy Sheet,' Mater. Sci. and Eng., Vol.A257,pp.204-214, 1998
J. J. Park, 'Predictions of Texture and Plastic Anisotropy Developed by Mechanical Deformation in Aluminum Sheet,' J. of Mater. Proc. Tech., Vol.87, pp.146-153, 1999
Y. Saito, H. Utsunomiya, H. Suzuki and T. Sakai, 'Improvement in the R-Value of Alumi-num Strip by a Continuous Shear Deformation Process,' Scripta Mater., Vol.42, pp.1139-1144,2000
H. N. Lee, S. T. Chang, H. S. Rand S. K. Hwang, 'Monte-Carlo Simulation of the Effect of Initial Grain Size on Grain Growh and Texture Evolution,' J. Kor. Inst. Met. & Mater., Vol.36, No.11, pp.1831-1837, 1998
S.-H. Choi, F. Barlat and J. H. Chung, 'Modeling of Textures and Yield Surfaces during Recrystallization in IF Steel Sheets,' Scripta Mater., Vol.45, pp.1155-1162, 2001
K. J. Kim, 'Plastic Strain Ratios and Planar Anisotropy of AA5182/Polypropy lene/ AA5182 Sandwich Sheets,' Int. J. Automotive Technology, Vol.6, No.3, pp.259-268, 2005
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.