최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.22 no.11 = no.176, 2005년, pp.91 - 98
임상헌 (창원대학교 기계설계공학과 대학원) , 이춘만 (창원대학교 기계설계공학과)
This study has been focused on the development of a high speed feeding type three-dimensional bending machine. It is designed for manufacture of copper pipe for heat exchangers. For the purpose of design of the machine, analysis of bending process, structural analysis and reliability evaluation of t...
Nakamura, S., Sugiura, H., Onoe, H. and Ikemoto, K., 'Hydro-mechanical drawing of automotive parts,' Journal of Materials Processing Technology, Vol. 46, pp. 491-503, 1994
Kang, H. S., Kim, D. S., Hur, S. and Hong, S. I., 'A study about shape processing for the bend of the Copper-Tube that use Hair Pin Bending Machine,' Proceedings of the KSPE Spring Conference, pp. 1705-1708, 2003
Kim, K. Y. and Yun, D. P., 'Deformation analysis of copper pipe for hair pin under the bending forming using the Mandrel,' Proceedings of the KSPE Spring Conference, pp. 1630-1633, 2003
Kim, D. S., Moon, C. Y., Kim, S. W., Choi, H. T., Jeong, Y. D. and Kim, Y. S., 'A Study in the PA12 Tube Spring-back,' Proceedings of the KSPE fall Conference, pp. 300-304, 1997
Hu, Z., 'Elastic-plastic solutions for spring-back angle of pipe bending using local induction heating,' J. of Materials Processing technology, Vol. 102, pp. 103-108, 2000
Al-Qureshi, H. A., 'Elastic-plastic analysis of tube bending,' International Journal of Machine Tools & Manufacture, Vol. 39, pp. 87-104, 1999
Pytel, A. and Kiusalaas, J., 'Engineering Mechanics Dynamics SI Edition,' HarperCollins Publishers Inc., pp. 415-521, 1996
※ AI-Helper는 부적절한 답변을 할 수 있습니다.