최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.22 no.12 = no.177, 2005년, pp.124 - 130
강혁진 (서울대학교 기계항공공학부 대학원) , 안성훈 (서울대학교 기계항공공학부) , 이재상 (한국원자력연구소 양성자 가속기 사업단) , 이재형 (한국원자력연구소 양성자 가속기 사업단) , 김경균 ((주)에이빔)
The research on surface modification technology has been advanced to improve the properties of engineering materials. ion implantation is a novel surface modification technology to enhance the mechanical, chemical and electrical properties of substrate's surface using accelerated ions. In this resea...
Sudarshan, T. and Bhat, D., 'Surface Modification Technologies,' Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 42, pp. 403-404,1989
Klingenberg, M., Arps, J., Wei, R., Demaree, J. and Hirvonen, J., 'Practical Applications of Ion Beam and Plasma Processing for Improving Corrosion and Wear Protection,' Surface and Coatings Technology, Vol. 158, pp. 164-169,2002
Bienk, J. and Mikkelsen, J., 'Application of Advanced Surface Treatment Technologies in Modern Plastic Moulding Industry,' Wear, Vol. 207, pp. 6-9,1997
Jagielski, J., Piatkowska, A., Aubert, P., Legrand-Buscema, C., Le Paven, C., Gawlik G., Piekoszewski, J. and Werner, Z., 'Effects of High Dose Nitrogen Implantation into Aluminum,' Vacuum, Vol. 70, pp. 147-152,2003
Burnel, S. and Datta, K., 'Surface Engineering Casebook,' Woodhead Publishing Limited, pp. 3-32, 1996
Jaeger, R. C., 'Introduction to Microelectronic Fabrication,' Prentice Hall, pp. 91-120,2002
Shim, Y. K., Kim, Y. K., Lee, K. H. and Han, S., 'The Properties of AlN Prepared by Plasma Nitriding and Plasma Source Ion Implantation Techniques,' Surface and Coatings Technology, Vol. 131, pp. 345-349,2000
Kim, Y. S., Yang, J. C. and Kim. D. E., 'Effect of Film Thickness on the Tribological Characteristics of Zdol Lubricant on Silicon Surface,' International Journal of Precision Engineering and Manufacturing, Vol. 5, No.1, pp. 13-18,2004
Fukumoto, S., Ando, M., Tsubakino. H., Terasawa, M., and Mitamura, T., 'Morphology of AIN formed in Aluminum by ion implantation,' Materials Chemistry and Physics, Vol. 54, pp. 351-355, 1998
Sonnleitner, R., Hahn, K. and Rossi, F., 'Microstructure of Plasma Nitrided Layers on Aluminum,' Surface and Coatings Technology, Vol. 156, pp. 149-154,2002
Hara, Y., Yamanishi, T., Azuma, K., Uchida, H. and Yatsuzuka, M., 'Microstructure of Al-alloy Surface Implanted with High-dose Nitrogen,' Surface and Coating Technology, Vol. 156, pp. 166-169,2002
Tetsuji, Y., Yoshihito, H., Ryuhei, M., Kingo, A., Etsuo, F. and Mitsuyasu, Y., 'Profile of Implanted Nitrogen Ions in Al Alloy for Mold Materials,' Surface and Coatings Technology, Vol. 136, pp. 223-225,2001
Guzmam, Z., Bonini, G., Adami, M., Ossi, P., Miotello, A., Antisari, M., Serventi, A. and Voltolini, E., 'Mechanical Behaviour of Nitrogen-Implanted Aluminum Alloys,' Surface and Coatings Technology, Vol. 83, pp. 284-289, 1996
Liao, J., Xia, L., Sun, M., Sun, Y., Liu, W., Xu, T. and Xue, Q., 'Tribological behavior of gradient modified layer on 2024 aluminum alloy Modified by Plasmabased Ion Implantation,' Wear, Vol. 256, pp. 840-845, 2004
Youssef, A., Budzynski, P., Filiks, J. and Surowiec, Z., 'Improvement of Tribological Properties of Aluminum by Nitrogen Implantation,' Vacuum, 2005. (In press)
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.