최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.14 no.6, 2005년, pp.52 - 60
한석영 (한양대학교 기계공학부) , 이병주 (한양대학교 전자컴퓨터공학부) , 김선정 (한양대학교 대학원 전기제어생체공학부) , 김종오 (한양대학교 대학원 자동차공학과) , 정구봉 (한양대학교 대학원 전자전기제어계측공학과)
Ultra-precision positioning systems basically require high natural frequency and sufficient workspace. To cope with this requirement, flexure hinge mechanisms have been developed. However, previous designs are difficult to satisfy the functional requirements of the system due to difficulty in modeli...
Gao, P., Swei, S.M. and Yuan, Z., 1999, 'A New Piezodriven Precision Micropositioning Stage Utilizing Flexure Hinges,' Nanotechnology, Vol. 10, pp. 394-398
Scire, F.E. and Teague, E.C., 1978, 'Piezo- driven $50-{\mu}m$ Range Stage with Subnanometer Resolution,' Rev, Sci, Instrum., Vol. 49, No. 12, pp. 1735-1740
Ryu, J.W., Gweon, D.G. and Moon, K.S., 1997, 'Optimal Design of a Flexure Hinge Based $XY{\theta}$ Wafer Stage,' Precision Engineering, Vol. 21, pp. 18-28
Yang, R., Jouaneh, M. and Schweizer, R., 1996, 'Design and Characterization of a Low-profile Micropositioning Stage,' Precision Engineering, Vol. 18, pp. 20-29
Pahk, H.J., Lee, D.S. and Park, J.H., 2001, 'Ultra Precision Positioning System for Servo Motor-Piezo Actuator using the Dual Servo Loop and Digital Filter Implementation,' Machine Tools & Manufacture, Vol. 41, pp. 51-63
Suh, N.P., 2001, Axiomatic Design, Oxford University Press, New York
Freeman, R.A. and Tesar, D., 1988, 'Dynamic Modeling of Serial and Parallel Mechanisms/Robotics Systems, Part I-Methodology, Part II-Applications,' Proc. of 20th ASME Mechanisms Conference, Orlando. FL. DE-Vol. 15, No 3, pp. 7-27
Kang, H.J., Yi, B-J., Cho, W., and Freeman, R.A., 1990, 'Constraint-Embedding Approaches for General Closed-Chain System Dynamic in Terms of A Minimum Coordinate Set.' Proc. ASME Biennial Mechanism Conf., Chicago, Vol. 24, pp.125-132
Chung, G.B., Yi, B-J., Suh, I.H., Kim, W.K. and Chung, W.K., 2001, 'Design and Analysis of a Spatial 3-DOF Micro Manipulator for Tele- operation,' Intelligent Robots and Systems, Proc. IEEE International Conference on Intelligent Robots and Systems, Maui, pp. 337-342
Ryu, J.W., 1997, '6-Axis Ultraprecision Positioning Mechanism Design and Positioning Control,' Ph. D. dissertation, Department of Mechanical Engineering, KAIST
Yi, B-J., Chung, G.B., Kim. W. K. and Suh. I. H., 2003, 'Design and Experiment of a 3-DOF Parallel Micromechanism Utilizing Flexure Hinges,' IEEE Transaction on Robotics and Automaion, Vol. 19, No. 4, pp. 604-612
Craig, J., 1986, Introduction to Robotics, Addison-Wesley, Menlo Park, CA
Smith, S.T., Chetwynd, D.G. and Bowen, D.K., 1988, 'Design and Assessment of Monolithic High-Precision Translation Mechanisms,' J Phys E: Sci Instrum, Vol. 20, pp. 977-983
Venkataraman, P., Applied Optimization with MATLAB Programming, Wiley, New York
※ AI-Helper는 부적절한 답변을 할 수 있습니다.